Removing The F9B Shell; Limited Lifetime Warranty - Rapido Trains canadian User Manual

at the ends. At this point, the underbody and interior of the car is almost free from the
shell. Spread the sides apart (you can do so by pulling outward on the sides with your
fingertips or by using toothpicks wedged between the shell and the underbody) and the
underbody and interior will slide out as a unit.
Be mindful of the brake chains when you slide out the underbody and interior. If they
come loose they can be reattached with CA.

REMOVING THE F9B SHELL

Removing the F9B shell is a fairly identical process to removing the FP9A shell. As we
know you have the FP9A manual (it's in the box!), go read that so we can stop writing
these instructions. We have layouts to work on, flowers to arrange, and baskets to
weave, and these instructions are taking FOREVER to write. We should do what all the
other manufacturers do and include one photocopied, folded page in the box that took
five minutes to prepare and says ALMOST NOTHING about your model. That's it. I'm
leaving. We'll shrink these instructions down to 1 point font and put them on one folded
up piece of paper in the bottom of the box.

LIMITED LIFETIME WARRANTY

Right. Forgot about the warranty information. Oh bother.
OK... We will do our best to solve any problems or issues that you may have with your
Canadian. If your train has any defects that originate from the factory, we will repair
your train using new components or replace it outright should a repair not be possible.
However, we can only replace your Canadian while we have additional models in
stock. We normally keep spare cars and locomotives for up to six months after it is
released. If you purchased your Canadian or first opened it after that time, it is possible
that we no longer have any replacements and that a repair is the only option. Please
give us a call or write us an email, and we will see what we can do to help you out. Our
contact information is on the inside cover of this manual.
If you live overseas and your Canadian has a factory defect, we have some expert
modellers overseas who may be able to repair your models for you, thereby avoiding
the necessity of shipping it all the way back to Canada. Please contact us and we'll
make arrangements.
There are a number of things that this warranty can not cover. If your cars or F9B arrive
with a couple of loose grab irons or underbody bits (4000 parts!!!) there is a very good
chance that you can effect a repair in less time and effort that it would take to contact
us. White glue (PVA), such as Weldbond, works wonders for securing all sorts of parts
and will not mar or damage your paint. If parts are missing however, that is another
story – call us or send us an email and we'll send you some replacements.
8