Advertisement
Get started
The headset contains the following
parts shown on the title page:
power key (1), charger connector
(2), earpiece (3), microphone (4),
earloop (5), volume key (6),
indicator light (7), and answer/end
key (8).
Before using the headset, you must
charge the battery and pair the
headset with a compatible device.
Parts of the headset are magnetic.
Metallic materials may be attracted to
the headset. Do not place credit cards
or other magnetic storage media near
the headset, because information
stored on them may be erased.
Chargers
Check the model number of any
charger before using it with this
headset. The headset is intended for
use with the
AC-3, AC-4, and DC-4 chargers.
4
Warning: Use only
chargers approved by
Nokia for use with this
particular enhancement. The use of
any other types may invalidate any
approval or warranty and may be
dangerous.
When you disconnect the power cord
of any enhancement, grasp and pull
the plug, not the cord.
Charge the battery
The headset has an internal,
nonremovable, rechargeable
battery. Do not attempt to remove
the battery from the device, as you
may damage the device.
1. Connect the charger to a wall
outlet.
2. Connect the charger cable to
the charger connector. The red
indicator light is on while
charging. It may take a while
before charging starts. If
Advertisement
