Juice Power AP4-0006A User Reference Manual page 5

Outside
diameter
(OD)
5.5(mm)
Figure 2: Power Adapter & AC Power Cord
Instructions for Use
1. Insert the 2-prong female of the AC power cord into the
power adapter.
2. Insert the power plug of the adapter into power
jack of the charger station.
3. Plug the 2-prong male connector into a 110V-240V
wall outlet.
4. Verify the green LED on the power adapter is lit to ensure
it's receiving power.
Inside Plug
diameter length
(ID) (L)
2.5(mm) 10(mm)
Table 1: Power Plug Specifications
Negative / Positive
*Center pin for positive voltage and the
outer shield for negative voltage
5