Shark NV300NZ Owner's Manual page 12

Rotator
Table of Contents

Advertisement

TROUBLE-
Vacuum is not picking up dirt. No suction or light suction.
SHOOTING
• C heck filters to see if they need cleaning. Follow instructions for rinsing and drying the filters before re-inserting back into the vacuum.
GUIDE
• Dust cup may be full; empty dust cup.
• C heck tube, tube connections, nozzles and accessories for blockages; clear blockages if required.
Vacuum lifts area rugs
• S uction is powerful. Take care when vacuuming area rugs or rugs with delicately sewn edges.
• T urn off the unit to disengage the brush roll and restart with the POWER button.
Brush roll does not spin
• I mmediately turn off and unplug vacuum, disconnect the nozzle and remove blockage before reconnecting and turning vacuum back on.
• T his vacuum is equipped with a thermal shut down safety feature in the event that your vacuum over heats. If your vacuum does shut down, slide the POWER switch
to the "O" position and unplug the unit. After about 30 minutes, your vacuum should be ready to operate again. Plug in the power cord and turn the unit on to begin
vacuuming again.
Euro-Pro, Shark, and Shark Rocket are trademarks of Euro-Pro
Operating LLC. All other brand names may be trademarks of their
respective owners.
1 2
w w w . s h a r k n i n j a m a n u a l s . c o m

Advertisement

Table of Contents
loading

Table of Contents