I’m having trouble trying to add apps to my TV. I don’t know if my TV is to old. I get to where it tells me to put my zip code in so it can find my provider and it just sits there like it thinking but not doing anything. I have also tried to update my tv but it does the same thing. Thank you, I’m looking forward to your reply!

1 comments:

Mr. Anderson

May 20, 2025

If the Sharp LC-65UB30U TV is unable to add apps or update due to a loading issue after entering the zip code, check the TV's network settings and connection. Make sure the TV is properly connected to the internet. If a network issue is indicated (e.g., symbols are displayed), resolve the connection problem first.

This answer is automatically generated

Summary of Contents for Sharp LC-65UB30U

Page 1 LC-65UB30U LC-55UB30U LC-50UB30U LC-43UB30U LIQUID CRYSTAL TELEVISION TÉLÉVISEUR À CRISTAUX LIQUIDES TELEVISOR DE CRISTAL LÍQUIDO Setup Guide Guide de Setup IMPORTANT : Please read this setup guide and built-in operation manual before starting operating the equipment. IMPORTANT : Veuillez lire ce guide de setup et le mode d’emploi intégré...
Page 2 IMPORTANT: DECLARATION OF CONFORMITY: Model No.: To aid reporting in case of loss or theft, please record the SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-65UB30U/LC-55UB30U/LC-50UB30U/ TV's model and serial numbers in the space provided. LC-43UB30U. Serial No.: The numbers are located at the rear and left side of the TV.
Page 3: Calling For Service
Product which were caused by repairs or attempted repairs performed by anyone other than a Sharp authorized servicer. Nor shall Sharp be liable or in any way were caused by repairs or attempted repairs performed by anyone other than a Sharp authorized servicer.
Page 4 IMPORTANT INFORMATION FCC Compliance Statement WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD received, including interference that may cause undesired operation.
Page 5: Dear Sharp Customer
DEAR SHARP CUSTOMER IMPORTANT SAFETY INSTRUCTIONS Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many f )When the product exhibits a distinct change in performance - this indicates a need for years of trouble-free operation of your product, please read the Important Safety Instructions service.
Page 6 To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved cleaning in the placement of older CRT televisions. cloths are available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD-CLOTH-3) packs. ALWAYS place your older CRT television on furniture that is sturdy and Call 1-800-BE-SHARP for ordering, or VISIT http://www.sharpusa.com/SharpDirect.
Page 7 IMPORTANT SAFETY INSTRUCTIONS Wireless LAN This TV has received the following certiﬁcations. ® - Wi-Fi CERTIFIED™ (certiﬁcation program from the Wi-Fi Alliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 8: Informations Importantes
DÉCLARATION DE CONFORMITÉ: N° de modèle : Pour faciliter la déclaration de perte ou de vol, veuillez noter TÉLÉVISION À ÉCRAN À CRISTAUX LIQUIDES SHARP, MODÈLE LC-65UB30U/LC-55UB30U/ les numéros de modèle et de série dans l'espace prévu à LC-50UB30U/LC-43UB30U. N° de série: cet effet.
Page 9 INFORMATIONS IMPORTANTES Déclaration de conformité de la FCC AVERTISSEMENT Cet appareil est conforme à la partie 15 des règlements FCC. Son fonctionnement est soumis aux deux conditions suivantes : (1) l'appareil ne provoquera pas d'interférences nuisibles, et (2) il doit accepter les NE PAS INGÉRER DE PILES, RISQUE DE BRÛLURE CHIMIQUE interférences reçues, y compris celles pouvant provoquer un fonctionnement indésiré.
Page 10: Cher Client Sharp
CHER CLIENT SHARP CONSIGNES DE SÉCURITÉ IMPORTANTES Nous vous remercions pour votre achat de ce téléviseur à cristaux liquides Sharp. Pour en assurer e)si l'appareil est tombé ou a été endommagé ; la sécurité et le bon fonctionnement pendant de longues années, veuillez lire attentivement les f)Si l'appareil présente des changements visibles de performances –...
Page 11 Pour éviter tout risque de rayer le cadre ou l'écran, veuillez utiliser un chiffon doux et non-pelucheux pour le nettoyage. Des chiffons de nettoyage approuvés sont disponibles directement auprès de Sharp, par paquet d'une (00Z-LCD-CLOTH) ou de trois (00Z-LCD-CLOTH-3) unités. APPELEZ le (905)568-7140 ou CE.org/safety...
Page 12 CONSIGNES DE SÉCURITÉ IMPORTANTES LAN sans-ﬁl Ce téléviseur a reçu les certiﬁcations suivantes. ® - Wi-Fi CERTIFIED™ (programme de certiﬁcation de Wi-Fi Alliance Cet appareil est conforme à la partie 15 des règlements FCC. Son fonctionnement est soumis aux deux conditions suivantes: (1) l'appareil ne provoquera pas d’interférences nuisibles, et (2) il doit accepter les interférences reçues, y compris celles pouvant provoquer un fonctionnement indésiré.
Page 13 DECLARACIÓN DE CONFORMIDAD: Modelo N°: Para facilitar el reporte en caso de pérdida o robo, escriba TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO SHARP, MODELO LC-65UB30U/LC-55UB30U/ por favor el modelo del TV y los números de serie en el LC-50UB30U/LC-43UB30U. Serie N°: espacio suministrado.
Page 14 INFORMACIÓN IMPORTANTE Declaración de conformidad con la FCC ADVERTENCIA Este dispositivo cumple con el Apartado 15 de las Normas FCC. Su funcionamiento está sujeto a las dos condiciones siguientes: NO INGERIR LAS PILAS. PELIGRO DE QUEMADURAS QUÍMICAS (1) Este dispositivo no deberá causar interferencias perjudiciales, y (2) deberá aceptar cualquier interferencia que reciba, incluyendo interferencias que puedan causar un funcionamiento no deseado.
Page 15 ESTIMADO CLIENTE DE SHARP INSTRUCCIONES DE SEGURIDAD IMPORTANTES Gracias por haber adquirido este televisor SHARP con pantalla de cristal líquido. Para garantizar d)Si el producto no funciona normalmente siguiendo las instrucciones de operación. su seguridad y muchos años de uso sin problemas de su producto, por favor lea cuidadosamente Ajuste solamente aquellos controles descritos en las instrucciones de operación, ya que un ajuste...
Page 16 INSTRUCCIONES DE SEGURIDAD IMPORTANTES SEGURIDAD DE LOS NIÑOS: cuando se deja descuidado y sin usar durante largos periodos de tiempo, desenchúfelo de la toma de corriente de la pared y desconecte la antena. Esto evitará daños al televisor debidos a rayos y subidas ASUNTOS RELACIONADOS CON LA CORRECTA COLOCACIÓN DEL TELEVISOR de tensión.
Page 17 INSTRUCCIONES DE SEGURIDAD IMPORTANTES LAN inalámbrico Este televisor ha recibido las siguientes certiﬁcaciones. ® - Wi-Fi CERTIFIED™ (programa de certiﬁcación de la Wi-Fi Alliance Este dispositivo cumple con el Apartado 15 de las Normas FCC. Su funcionamiento está sujeto a las dos condiciones siguientes: (1) Este dispositivo no deberá...
Page 18 Accessories/Accessoires/Accesorios ENGLISH FRANÇAIS ESPAÑOL Supplied Accessories Accessoires fournis Accesorios suministrados Make sure the following accessories are provided Vériﬁez si les accessoires suivants sont fournis Asegúrese de que los siguientes accesorios with the product. avec l'appareil. hayan sido suministrados con el producto. 1 Remote control unit (x1) 1 Télécommande (x1) 1 Control remoto (x1)
Page 19 Attaching the Stand/Fixation du socle/Colocación del soporte ENGLISH FRANÇAIS ESPAÑOL Before attaching (or detaching) the Avant de poser (ou déposer) le socle, Antes de poner (o quitar) el soporte, stand, unplug the AC cord. débranchez le cordon secteur. desenchufe el cable de CA. Before performing work spread Avant de procéder aux opérations, Antes de trabajar con el televisor,...
Page 20 AC power supply/Alimentation secteur/Fuente de alimentación de CA ENGLISH FRANÇAIS ESPAÑOL AC connection Connexion secteur Conexión de CA Attach your antenna to the back of the Fixez votre antenne au dos du Coloque su antena en la parte television. (See page 22.) téléviseur.
Page 21 AC power supply/Alimentation secteur/Fuente de alimentación de CA ENGLISH FRANÇAIS ESPAÑOL POWER When turning on the TV for the ﬁrst Lorsque vous allumez le téléviseur Al encender el televisor por primera POWER time, press POWER on the television. pour la première fois, appuyez sur vez, pulse POWER en el televisor.
Page 22 EL TELEVISOR DE LA TOMA DE CORRIENTE Y IF YOU STILL ENCOUNTER NO POWER, SECTEUR ET RÉPÉTEZ LES ÉTAPES DE REPITA LOS PASOS DE INSTALACIÓN. PLEASE CONTACT US AT 1-800-BE-SHARP. L'INSTALLATION. SI SIGUE SIN PODER ENCENDERLO, PÓNGASE SI LE TÉLÉVISEUR NE SE MET TOUJOURS...
Page 23 Connection/Connexion/Conexión ENGLISH Antennas To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set. For connecting the antenna cable to the TV, use commercially available cables.
Page 24 Connection/Connexion/Conexión Connecting to video equipment or PC ENGLISH Connexion à un équipement vidéo ou à un ordinateur Conexión a un equipo de vídeo o a un PC Types of Connection For connecting the TV to external equipment, use commercially available Image Terminal cables.
Page 25 Connection/Connexion/Conexión ENGLISH You can connect many types of external equipment to your TV. To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV. For connecting the TV to external equipment, use commercially available cables. CAUTION To protect equipment, always turn off the TV before connecting any external equipment.
Page 26 Connection/Connexion/Conexión ENGLISH C O MPO N E N T /V I D E O Connecting a Blu-ray Disc/DVD Player or HD Cable/Satellite Set-top Box Y /V Pb / C b P r/ C r AUDIO 2 When using a Component cable (COMPONENT/VIDEO IN): To enjoy 1080p display capability, connect your external equipment using an HDMI-certiﬁed cable or a component cable and set the equipment to 1080p output.
Page 27 Connection/Connexion/Conexión ENGLISH Connecting a Surround System/Audio System 4 When connecting an AV ampliﬁer for a surround system Letting the TV output the audio to an AV ampliﬁer: *1 When you connect ARC-compatible equipment, use HDMI IN 3. HDMI OUT If the image is not in sync with the audio, check the settings of the connected surround system.
Page 28 Connection/Connexion/Conexión ENGLISH Connecting a PC Refer to built-in operation manual for a list of PC signals compatible with the TV. 6 When using an HDMI cable (HDMI IN 1, 2, 3 or 4): Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI- certiﬁed cable to the HDMI IN 2 terminal, connect an RCA audio to Ø...
Page 29 Watching TV/Pour regarder la télévision/Para ver TV ENGLISH FRANÇAIS ESPAÑOL Initial Installation Installation initiale Preparación inicial When you perform Easy Setup for the Lorsque vous effectuez la conﬁguration Cuando ejecute la Conﬁguración sencilla por ﬁrst time, it will automatically memorize facile pour la première fois, les chaînes primera vez, memorizará...
Page 30 Watching TV/Pour regarder la télévision/Para ver TV ENGLISH FRANÇAIS ESPAÑOL Antenna & Cable/STB Antenne&câble/boîtier Antena & Cable/STB Select the type of connection you will use Sélectionnez le type de connexion que Seleccione el tipo de conexión que to watch TV. vous utiliserez pour regarder la TV.
Page 31 Watching TV/Pour regarder la télévision/Para ver TV ENGLISH FRANÇAIS ESPAÑOL Completed Terminé Completado E-MANUAL The settings conﬁrmation screen is L'écran de conﬁrmation des réglages Se visualiza la pantalla de conﬁrmación NUMBERS FREEZE INPUT displayed. est afﬁché. de los ajustes. Examples of the settings Exemples de l'écran de Ejemplos de la pantalla de conﬁrmation screen...
Page 32 Viewing the Built-in Operation Manual/Afﬁchage du mode d'emploi intégré/Visualización del Manual de instrucciones integrado ENGLISH FRANÇAIS ESPAÑOL Viewing the Built-in Operation Manual Afﬁchage du mode d'emploi intégré Visualización del Manual de instrucciones integrado Press E-MANUAL on the remote control unit to display operation Appuyez sur E-MANUAL de la télécommande pour afﬁcher les Pulse E-MANUAL en el control remoto para ver información sobre information on the screen.
Page 33 Troubleshooting/Guide de dépannage/Solución de problemas ENGLISH FRANÇAIS ESPAÑOL Problem Possible Solution Problème Solution possible Problema Posible solución No power Check if you pressed POWER on the remote control Appareil hors Vériﬁez si vous avez appuyé sur le bouton marche No hay Compruebe si ha pulsado POWER en el control unit.
Page 35 SHARP ELECTRONICS CORPORATION 1 Sharp Plaza, Suite 1, Mahwah, New Jersey 07495-1123 SHARP CORPORATION Printed in China Imprimé en Chine Impreso en China...
Page 36 >>...
Page 37: Table Of Contents
>> Contents << 1. Part Names 5. Enjoying Photo/Music/Video Playback 9. Appendix 1-1. TV 5-1. Preparation 9-1. Removing the Stand 1-2. Remote Control Unit 5-2. Selecting the Folders to Play Back 9-2. Setting the TV on the Wall 5-4. Playing Back Files on a USB Memory 9-4.
Page 38 >> << ENG Important1...
Page 39 >> << ENG Important2...
Page 40 >> << ENG Important3...
Page 41 >> << ENG Important4...
Page 42 >> << ENG Important5...
Page 43: Part Names
>> Part Names << (Rear) (Front) See page 4-31. (Side) *1 See the Setup Guide. And see page 6-1 for external equipment connection. See page 6-2 for details on the Audio Return Channel. See page 6-3 for details on the MHL function. The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations.
Page 44: Remote Control Unit
>> Part Names << 1 POWER: Switch the TV power on or enter standby. Remote Control Unit 2 NUMBER: Set the channel. (See page 3-1.) 3 FREEZE: Set the still image. Press again to return to normal screen. (See page 3-4.) 4 / / / , ENTER: Select a desired item on the screen.
Page 45: Watching Tv
>> Watching TV << Displaying an External Equipment Image To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV. Example 1 Press INPUT. The INPUT list screen displays. 2 Press / to select the input source.
Page 46: Initial Installation
>> Watching TV << Initial Installation Location & Time Make settings for the country, area and time zone where Perform the following steps before you press POWER on you use the TV. the remote control unit. 2 Press / to select "United States", "Canada" or 1.
Page 47 >> Watching TV << 5 Press to select "Home" or "Store". Initial Installation (Continue) Press ENTER to enter the setting. 4 Press / to select the Daylight Savings Time, and then press ENTER. "Auto" is the default selection. TV Location Select "Home"...
Page 48 >> Watching TV << To watch TV, select the input source corresponding to Initial Installation (Continue) the terminal connected to the set-top box. When doing Antenna & Cable/STB so, you must make the setting to skip "TV". Press Select the type of connection you will use to watch TV. select "On", and then press ENTER.
Page 49 >> Watching TV << Initial Installation (Continue) Smart TV When you connect to the Internet on the TV, select the CH Search (Channel search) desired connection method and follow the instructions Channel auto search makes the TV look for all channels shown on the display.
Page 50 >> Watching TV << Examples of the settings confirmation screen Initial Installation (Continue) When "Antenna & Cable" was selected in step 6. Connection using an ETHERNET cable: Select "Wired" and press ENTER. Confirm that the TV is properly connected with the router, and then press "Next".
Page 51 >> Watching TV << Initial Installation (Continue) When "Set-top box" was selected in step 6. Selecting "No" will complete the Easy Setup procedure. This may not display correctly depending on the connected equipment. This is not displayed correctly when the connected equipment is off.
Page 52: Direct Button Operation
>> Direct Button Operation << Changing Channels NOTE When selecting a 1-digit channel number, it is not You can change channels in several ways. necessary to press 0 before the number. Method 1 When you enter 0-9 only, you have to press Ent to Using CH on the remote control unit or on the TV.
Page 53: Changing Volume
>> Direct Button Operation << Changing Volume You can change the volume by pressing VOL+/- on the TV or on the remote control unit. To increase the volume, press VOL +. To decrease the volume, press VOL -. ENG 3-2...
Page 54: Mute
>> Direct Button Operation << MUTE Mutes the current sound output. Press MUTE. " " will be displayed on the screen, and the sound is silenced. ENG 3-3...
Page 55: Freeze
>> Direct Button Operation << FREEZE Allows you to capture and freeze a moving image that you are watching. Press FREEZE. A moving image is captured. Press FREEZE again to cancel the function. NOTE When this function is not available, "No displaying still image available."...
Page 56: Flashback
>> Direct Button Operation << FLASHBACK Press FLASHBACK to switch to the previously tuned channel or previous input mode. Press FLASHBACK again to switch back to the currently tuned channel. NOTE FLASHBACK will not work if no channel has been changed after the TV is turned on.
Page 57: Smart Central
>> Direct Button Operation << SMART CENTRAL Allows you to directly activate various types of applications. 1 Press SMART CENTRAL to display the application window. Press EXIT to switch back to the currently tuned channel. 2 Press to select the desired application, and then press ENTER.
Page 58: Netflix
>> Direct Button Operation << NETFLIX Displays the Netflix screen. Press NETFLIX. NOTE If you press the NETFLIX button when the TV is turned off, the TV turns on and the NETFLIX screen is displayed. To enjoy Netflix, you need to make: —a broadband Internet connection (See page 7-1.) —settings of Internet Setup...
Page 59: Av Mode
>> Direct Button Operation << AV MODE AV MODE gives you several viewing options to choose from to best match the surrounding environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of device connected. You can use USER Mode to create customized settings for each TV input.
Page 60 >> Direct Button Operation << AV MODE (Continue) NOTE You can select a different AV MODE item for each input STANDARD: For a highly defined image in a normal mode. (For example, select STANDARD for TV input and lighting. DYNAMIC for COMPONENT.) MOVIE: For a movie.
Page 61: Closed Captions And Digital Closed Captions
>> Direct Button Operation << 1 Press CC. Closed Captions and Digital Closed This will present the Closed Caption information Captions display. Your TV is equipped with an internal Closed Caption 2 Press CC while the Closed Caption information is still on decoder.
Page 62 >> Direct Button Operation << Closed Captions and Digital Closed NOTE See page 4-31 for detailed closed caption settings. Captions (Continue) When the program contains no closed caption, "--" Examples: displays in the closed caption information. In a case where there are two closed caption services If the language code, e.g.
Page 63: View Mode
>> Direct Button Operation << VIEW MODE You can select the screen size. 1 Press VIEW MODE. The View Mode menu displays. The menu lists the View Mode options selectable for the type of video signal currently being received. 2 Press VIEW MODE or / while the View Mode menu is displayed to select a desired item on the menu.
Page 64 >> Direct Button Operation << VIEW MODE (Continue) For 4:3 programs Example: Screen size images Side Bar S.Stretch (Smart stretch) Zoom Stretch Suitable for viewing Suitable for viewing wide- This mode is useful for 1.78:1 Suitable for stretching 4:3 conventional 4:3 programs in screen 2.35:1 anamorphic DVDs.
Page 65 >> Direct Button Operation << VIEW MODE (Continue) For PC Example: Screen size images Input signal Normal Zoom Stretch Keeps the original aspect ratio in For viewing widescreen An image fully fills the a full screen display. programs. The top and bottom screen.
Page 66: On-Screen Display Menu
>> On-Screen Display Menu << Introduction LCFONT embedded Guide display Item displayed in white This indicates the buttons that can be operated on the This indicates that the item can be selected. displayed screen. The guide display varies depending Item displayed in gray on the menu setting screen.
Page 67 LCFONT: This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy-to-read characters on LCD screens. ENG 4-2...
Page 68: On-Screen Display Menu Operation
>> On-Screen Display Menu << On-Screen Display Menu Operation Example 1 Press MENU to display the MENU screen. 3 Press MENU to exit. Press to select the desired menu. NOTE Menu options differ in the selected input modes, but the Press / to select a specific adjustment item, and operating procedures are the same.
Page 69: Menu Operation Buttons
>> On-Screen Display Menu << Menu Operation Buttons Using the control panel of the TV You can also operate the menu with the control panel of the Using the remote control Use the following buttons on the remote control to operate Button operations on the control panel correspond to the the menu.
Page 70: Initial Setup
>> On-Screen Display Menu << Feature Demo: When "On" is selected, after all the Initial Setup settings are completed, the Feature Demo screen is Example NOTE displayed if there is no operation for several minutes. For operating the on-screen display menu, Antenna &...
Page 71 >> On-Screen Display Menu << Initial Setup (Continue) Favorite CH (Favorite Channel Setting) Example This function allows you to program 4 favorite channels, in 4 TV Channel Setup different categories. By setting the favorite channels in CH Setup (Channel Setup) advance, you can select your favorite channels easily.
Page 72 >> On-Screen Display Menu << Initial Setup (Continue) MPAA (Voluntary movie rating system) Example Example Parental Control V-Chip IMPORTANT: Three conditions must be met to enable the V-Chip: 1. Secret No. is registered. 2. V-Chip/V-Chip (DTV Only) settings have been made. The "V-Chip (DTV Only)"...
Page 73 >> On-Screen Display Menu << Content Initial Setup (Continue) FV: Fantasy violence. Example V: Violence. Parental Control S: Sexual situation. V-Chip L: Adult language. D: Sexually suggestive dialog. TV Parental Guidelines Example Content Rating TV-Y TV-Y7 TV-G Suggested TV-PG TV-14 TV-MA : The content rating can be set, but this rating is not normally broadcast by TV stations.
Page 74 >> On-Screen Display Menu << Initial Setup (Continue) Can.French Ratings (Canadian French Ratings) Example E: Exempt programming. Parental Control G: General: All ages and children, contains minimal direct V-Chip violence, but may be integrated into the plot in a humorous or unrealistic manner. Can.English Ratings (Canadian English Ratings) 8ans+: General but inadvisable for young children: May be E: Exempt: Includes news, sports, documentaries and...
Page 75 >> On-Screen Display Menu << Initial Setup (Continue) Quick Start Mode Example When this function is activated, you can reduce the TV's Parental Control start-up time or even let the TV in standby mode start V-Chip displaying images and so on via the connected equipment on the network.
Page 76 >> On-Screen Display Menu << Initial Setup (Continue) Advanced Example Digital Audio Out Input Settings You can output digital audio to an AV amplifier or similar Input Skip device whose DIGITAL AUDIO INPUT terminal is connected This setting allows you to skip the TV, HDMI 1, HDMI 2, to the DIGITAL AUDIO OUT terminal on the TV.
Page 77 >> On-Screen Display Menu << Initial Setup (Continue) Reset Example If complex adjustments are made and the settings cannot Advanced be restored to normal, you can reset the settings to the AQUOS LINK Setup factory preset values. If you have already set the Secret No., input the 4-digit Make the settings to use LINK Operation.
Page 78: Information
Software Update http://www.sharpusa.com/products/support/. If you have any This is used to upgrade the system software to enhance the questions, please TV functions. call 1-800-BE-SHARP (800-237-4277). 1 Press MENU to display the MENU screen, and then CAUTION press to select "Information".
Page 79 >> On-Screen Display Menu << Information (Continue) CAUTION Example Do not remove the USB memory device or unplug the Software Update AC cord while the software is being updated. Manual Update 5 When the software is successfully updated, a screen is displayed indicating that the update process is 2 Press / on the Manual Update screen to select "USB...
Page 80 >> On-Screen Display Menu << Information (Continue) Auto Update Setting Example When the TV is on, or when an Internet application is being Software Update accessed, this function enables the TV to connect to the Manual Update network and check for updates automatically. When an update is available, a message is displayed.
Page 81: Picture Settings
>> On-Screen Display Menu << Picture Settings AV MODE (Changing Pic.Quality) Example The audio and video settings can be changed to suit the Adjusts the picture to your preference with the following program or input content being watched. picture settings. NOTE NOTE The selectable items vary depending on the input source...
Page 82 >> On-Screen Display Menu << Picture Settings (Continue) Active Contrast Example Adjusts black level and white level of images. Advanced Advanced: Produces higher contrast image especially in C.M.S. dark scene. (Color Management System) Standard: Produces high contrast image. Color tone is managed using the six-color adjustment Off: No adjustment.
Page 83 >> On-Screen Display Menu << Picture Settings (Continue) Reset Example Returns Picture Settings to their factory preset values. To Advanced reset, select "Yes" and then press ENTER. Digital Noise Reduction Produces a clearer video image. High/Middle/Low: You can select a desired level for viewing a clearer video image.
Page 84: Audio Settings
>> On-Screen Display Menu << Audio Settings Audio Mode Example Selects one of the preset sound modes. You can adjust the sound quality to your preference with the following settings. Equalizer Settings NOTE Adjusts the boost or attenuation of different frequencies For operating the on-screen display menu, using either preset or custom settings.
Page 85: Smart Tv
>> On-Screen Display Menu << Smart TV Example Dashboard You can display a list of the main Smart TV settings. Internet Setup Configures LAN and Internet settings. (See pages 7-2 to 7-4.) SmartCentral Settings Select this option to enter the SmartCentral homescreen and you can directly access various types of applications. SmartCentral Homescreen select your TV provider and customize your preferences.
Page 86 >> On-Screen Display Menu << Smart TV (Continue) Timer Setting Example You can set the length of time the TV will remain in the Wallpaper Wallpaper Mode. Activating the function will display still images when the TV 3 hours/6 hours/12 hours/24 hours is in standby mode.
Page 87 >> On-Screen Display Menu << Smart TV (Continue) Example Remote Control Link Perform the following steps to configure the Remote Control Link connection using an IR blaster cable. IR Blaster Compatibility The supplied IR Blaster is only compatible with the following set-top box vendors (USA only): Manufacturer (STB) Service Provider (STB) Motorola...
Page 88 >> On-Screen Display Menu << Smart TV (Continue) Example Remote Control Link Initial Setup 1 Switch the channel selection of your set-top box to any channel (except CH10). 2 Connect one end of the USB extension cable to the USB port of the TV. 3 Plug the IR blaster dongle to other end of the USB extension cable.
Page 89 >> On-Screen Display Menu << Smart TV (Continue) Example Remote Control Link 6 On Input Selection, select the input terminal to which your set-top box is connected to the TV. 7 On Provider STB Selection, select the manufacturer of your set-top box. NOTE To display all manufacturers list, select "ALL".
Page 90 >> On-Screen Display Menu << Smart TV (Continue) Example Remote Control Link NOTE To narrow down the list when selecting the manufacturer of your set-top box, select one of the letters. The list of manufacturers beginning with the selected letter will appear on the screen. 8 The current settings screen appears, and then press ENTER to continue.
Page 91 >> On-Screen Display Menu << 10 If the TV changes to CH10, press / to select "Yes" Smart TV (Continue) and press ENTER to continue. Example Remote Control Link Test Connection 9 Select "Send" and press ENTER to allow the IR blaster dongle to send command to your set-top box.
Page 92 >> On-Screen Display Menu << Smart TV (Continue) Example Remote Control Link View TV Live Content on SmartCentral After the setup is complete, you can view live content from your TV provider in one place (across TV and streaming). 1 Press SMART CENTRAL. The SmartCentral homescreen appears. 2 In the Settings page, enter your zip code to search your TV provider.
Page 93 >> On-Screen Display Menu << Smart TV (Continue) Example Remote Control Link 4 Select the TV tab to view all of your content (TV, cable, satellite, or streaming). NOTE You can also filter the content by time and date, genre, popularity or favorite settings. 5 Select the desired content.
Page 94 >> On-Screen Display Menu << Smart TV (Continue) Example Advanced TV Name Setting Set this function when operating the TV from equipment connected by LAN or wireless LAN. Use the software keyboard when you need to input text at TV Name Setting. Software Keyboard Caps off Press "abc"...
Page 95: System Options
>> On-Screen Display Menu << System Options Shortcuts Example Provides quick access to various operations. NOTE For operating the on-screen display menu, see page 4-3. Power Control Power control setting allows you to save energy. Audio Only When listening to music from a music program, you can turn the screen off and enjoy audio only.
Page 96 Color/Text Opacity/Background Opacity NOTE The default value depends on the broadcasting station. Startup Screen With this function activated, the SHARP logo will be displayed when you turn on the TV. NOTE This function is not available when the TV is set to "Quick Start Mode".
Page 97: Preparation
>> Enjoying Photo/Music/Video Playback << Preparation CAUTION Do not use a USB extension cable when connecting a USB memory device to the USB You can connect the TV to a USB memory device, USB hard drive or Home Network server to terminal on the TV.
Page 98 >> Enjoying Photo/Music/Video Playback << Selecting the Folders to Play Back NOTE The Media screen can be displayed even by using the To play back data on a USB memory device, insert the application window. To display the application window, USB memory device on the TV.
Page 99 >> Enjoying Photo/Music/Video Playback << Selecting the Folders to Play Back NOTE Progressive format jpeg files are not supported. (Continue) USB 1.1 devices may not be played properly. Operation using USB hubs is not guaranteed. Video file format Some video file formats may not be played depending File Container Video...
Page 100 >> Enjoying Photo/Music/Video Playback << Playing Back Files on a USB Buttons for thumbnail operations Buttons Description Memory Device/Home Network / / / Select a desired item. Server ENTER When selecting a folder icon: NOTE Enter this directory. The screen images in this section are for the USB mode. When selecting a photo thumbnail: It may be slightly different in the Home Network mode.
Page 101 >> Enjoying Photo/Music/Video Playback << Playing Back Files on a USB Memory Device/Home Network Server (Continue) Slide Show The photos displayed on the thumbnail selection screen are displayed as a slide show. Buttons for slide show operation Buttons Description Return to the thumbnail selection screen. RETURN Previous file Green...
Page 102 >> Enjoying Photo/Music/Video Playback << Playing Back Files on a USB Memory Device/Home Network Server (Continue) Music Mode Example Buttons for music mode Buttons Description / / / Select a desired item. When selecting a folder icon: ENTER Enter this directory. When selecting a music file: Play music.
Page 103 >> Enjoying Photo/Music/Video Playback << Playing Back Files on a USB Memory Device/Home Network Server (Continue) Video Mode Example Buttons for file selecting operations Buttons Description / / / Select a desired item. When selecting a folder icon: ENTER Enter this directory. When selecting a video file: Play the video.
Page 104 >> Enjoying Photo/Music/Video Playback << Playing Back Files on a USB Memory Device/Home Network Server (Continue) Buttons for playing mode Buttons Description Fast forward Fast rewind Subtitle off Previous file Green Display/hide operation guide Blue Next file Yellow Go back to the file selection screen. RETURN ENG 5-8...
Page 105: Using Link Operation
>> Using LINK Operation << Connected LINK-compatible devices can be operated without changing the settings of the Controlling HDMI Equipment Using LINK Operation remote control unit. What’s LINK Operation? Using the HDMI CEC (Consumer Electronics Control) protocol, with LINK Operation you can Control the LINK-compatible audio system interactively operate compatible system equipment (Blu-ray disc equipment, AV amplifier, Set the volume of LINK-compatible audio system.
Page 106 >> Using LINK Operation << Controlling HDMI Equipment Using Audio Return Channel LINK Operation (Continue) This function allows you to listen to the TV audio via audio equipment without using an optical fiber cable, which AQUOS LINK Setup conventionally is required. Make the settings to use LINK Operation.
Page 107 >> Using LINK Operation << Using a Smartphone with the TV Auto Input Selection When an MHL-compatible device is connected while the TV This function enables you to connect the TV to a is on, the input mode is selected automatically. smartphone that supports Mobile High-Definition Link This function operates when "AQUOS LINK Control"...
Page 108: Using The Internet
>> Using the Internet << By connecting your TV to a broadband system, you can access the Internet from the TV. NOTE You can enjoy a variety of streaming content and Internet applications. This TV has a built-in wireless LAN function. Using a separate wireless USB LAN adapter may (See pages 7-6 to 7-7.) result in radio communications that do not comply with regulations on radio communications.
Page 109: Internet Setup
>> Using the Internet << Internet Setup Connection Type Select the connection type. Perform the procedure below to make adjustments or to Wired: The signal is detected and setup is performed confirm the settings for accessing the Internet. automatically. Use "IP Setup" to check and change the 1 Press MENU to display the MENU screen, and then settings as necessary.
Page 110 >> Using the Internet << Internet Setup (Continue) NOTE Operations cannot be guaranteed when used with Wireless Setup access points that do not have Wi-Fi® certification. Make adjustments and confirm the settings necessary for A wireless LAN router/access point is required to wireless LAN connection (such as search for the access connect the TV to the Internet using a wireless LAN.
Page 111 >> Using the Internet << Internet Setup (Continue) Connection Test After the connecting and setting procedures have been completed, you can check that the preparation is correct. Press "Yes" to start the "Connection Test". When the test results are displayed, follow the instructions shown on the screen.
Page 112 >> Using the Internet << Entering Text (Software Keyboard) When you are editing an input screen or specifying the Network settings used for accessing the Internet, enter text from the software keyboard. NOTE You can enter up to 128 characters for text. Some special characters or diacritics may not be available depending on where you enter the text.
Page 113 >> Using the Internet << Using Applications via the Internet Using the Application Window During Dock Display By connecting the TV to the Internet, you can enjoy a variety of broadband content, including videos, music and To access this function: System Options > Shortcuts > App photos.
Page 114 >> Using the Internet << Using Applications via the Internet (Continue) Deactivating Netflix Function You can deactivate the Netflix function. Refer to "Smart TV" > "Advanced" > "Netflix Help" and select "Deactivate" > "Yes". To confirm the Netflix status, check the information displayed on the screen and click "OK".
Page 115: Notes
This SHARP device facilitates the access to content and services provided by third parties. The content and services accessible via this device belong to and may be proprietary to third parties. Therefore, any use of such third party content and services must be in accordance with any authorization or terms of use provided by such content or service provider. SHARP shall not be liable to you or any third party for your failure to abide by such authorization or terms of use.
Page 116: Using The Miracast Devices
>> Using the Miracast devices << Miracast devices When you connect a device such as a Miracast-compatible smartphone or tablet to this TV, you can enjoy video and audio from the device on the TV's large screen and speakers. 1 Press INPUT and select "Miracast". 2 Enable the Miracast function on the Miracast device and connect to the TV.
Page 117: Removing The Stand
>> Appendix << 2 Detach the stand from the TV. Removing the Stand Before detaching (or attaching) the stand, make sure to turn off the TV and unplug the AC cord. CAUTION Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
Page 118: Setting The Tv On The Wall
Standard dimensions for wall mount kits are shown below. * The mounting means should be strong enough to bear the weight of the display. * The wall mounting bracket should have UL or related approval. Model LC-65UB30U LC-55UB30U LC-50UB30U LC-43UB30U...
Page 119 Do not use screws that are longer than the standard length. Screws that are too long may cause damage to the inside of the TV. Do not fasten the screws too firmly or loosely. This may damage the product or cause the product to fall, leading to personal injury. SHARP is not liable for these kinds of accidents.
Page 120: Troubleshooting
>> Appendix << Problem Possible Solution Troubleshooting No picture Is connection to other components correct? Problem Possible Solution Is the correct input selected? No power Check if you pressed POWER on the remote control unit. Pages 2-1 Is the AC cord disconnected? Is "On"...
Page 121 >> Appendix << Problem Possible Solution Troubleshooting (Continue) Miracast image/audio Check pairing. Problem Possible Solution cannot be output to the No sound Is connection to other components correct? Is the volume too low? Page 3-2 Is "Variable" selected in "Output Select"? Cautions regarding use in high and low temperature environments Page 4-11 When the unit is used in a low temperature space (e.g.
Page 122: Troubleshooting - Error Message
>> Appendix << Troubleshooting - Error Message The example of an error message displayed on a Error code Possible Solution screen — An incompatible audio This message is displayed when an audio signal has been format other than PCM, DTS or Dolby Digital is received.
Page 123: Specifications
+32°F to +104°F (0°C to +40°C) As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
Page 124 +32°F to +104°F (0°C to +40°C) As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
Page 125 +32°F to +104°F (0°C to +40°C) As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
Page 126 +32°F to +104°F (0°C to +40°C) As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
Page 127: Wireless Lan
>> Specifications << Wireless LAN Specification Standard IEEE 802.11b/g/n Frequency Band 2.412-2.462 GHz Security 64-bit, 128-bit WEP, TKIP, AES, WPA, WPA2, WPS, IEEE802.11i DBPSK@1Mbps DQPSK@2Mbps CCK@5.5/11Mbps Modulation BPSK@6/9 Mbps QPSK@12/18Mbps 16-QAM@24Mbps 64-QAM@48/54Mbps ENG 10-5...
Page 128: Trademarks
LC logo mark are registered trademarks of SHARP Corporation. This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy-to-read characters on LCD screens. However, other fonts are used for some screen pages, too. ENG 11-1...
Page 129: Dimensional Drawings
>> Dimensional Drawings << LC-65UB30U Unit: inch (mm) Unité: pouce (mm) Unidad: pulgada (mm) ENG 12-1...
Page 130 >> Dimensional Drawings << LC-55UB30U Unit: inch (mm) Unité: pouce (mm) Unidad: pulgada (mm) ENG 12-2...
Page 131 >> Dimensional Drawings << LC-50UB30U Unit: inch (mm) Unité: pouce (mm) Unidad: pulgada (mm) ENG 12-3...
Page 132 >> Dimensional Drawings << LC-43UB30U Unit: inch (mm) Unité: pouce (mm) Unidad: pulgada (mm) ENG 12-4...
Page 133: Software License
>> Software License << Information on the open-source software license. The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. Software composition The software included in this product is comprised of various software components whose THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR individual copyrights are held by third parties.
Page 134 >> Software License(Continue) << Libmng This library's function is primarily to read and display MNG animations. It is not meant as a full- ********************************************************************** featured image-editing component! It does however offer creation and editing functionality at the chunk level. (future modifications may include some more support for creation and or editing) COPYRIGHT NOTICE: ********************************************************************** Copyright (c) 2000-2007 Gerard Juyn (gerard@libmng.com)
Page 135 >> Software License(Continue) << mongoose Permission to use, copy, modify, and distribute this software for any purpose with or without fee is Copyright (c) 2004-2010 Sergey Lyubka hereby granted, provided that the above copyright notice and this permission notice appear in all copies.
Page 136 >> Software License(Continue) << 5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear Redistribution and use in source and binary forms, with or without modification, are permitted in their names without prior written permission of the OpenSSL Project. provided that the following conditions are met: 1.
Page 137 >> Software License(Continue) << The previous paragraph applies to the deliverable code and documentation in SQLite - those "You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this parts of the SQLite library that you actually bundle and ship with a larger application. Some License.
Page 138 >> Software License(Continue) << 3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor 5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable submitted for inclusion in the Work by You to the Licensor shall be under the terms and (except as stated in this section) patent license to make, have made, use, offer to sell, sell, conditions of this License, without any additional terms or conditions.
Page 139 >> Software License(Continue) << APPENDIX: How to apply the Apache License to your work To apply the Apache License to your This License becomes null and void to the extent applicable to Fonts or Font Software that has work, attach the following boilerplate notice, with the fields enclosed by brackets "[]" replaced been modified and is distributed under the "Bitstream Vera"...
Page 140 >> Software License(Continue) << This License becomes null and void to the extent applicable to Fonts or Font Software that has A "Combined Work" is a work produced by combining or linking an Application with the Library. been modified and is distributed under the "Tavmjong Bah Arev" names. The particular version of the Library with which the Combined Work was made is also called the "Linked Version".
Page 141 >> Software License(Continue) << 4. Combined Works. 5. Combined Libraries. You may convey a Combined Work under terms of your choice that, taken together, effectively do You may place library facilities that are a work based on the Library side by side in a single not restrict modification of the portions of the Library contained in the Combined Work and library together with other library facilities that are not Applications and are not covered by this reverse engineering for debugging such modifications, if you also do each of the following:...
Page 142 >> Software License(Continue) << For the developers' and authors' protection, the GPL clearly explains that there is no warranty for GNU GENERAL PUBLIC LICENSE this free software. For both users' and authors' sake, the GPL requires that modified versions be Version 3, 29 June 2007 marked as changed, so that their problems will not be attributed erroneously to authors of previous versions.
Page 143 >> Software License(Continue) << To "propagate" a work means to do anything with it that, without permission, would make you The Corresponding Source need not include anything that users can regenerate automatically directly or secondarily liable for infringement under applicable copyright law, except executing it from other parts of the Corresponding Source.
Page 144 >> Software License(Continue) << 4. Conveying Verbatim Copies. 6. Conveying Non-Source Forms. You may convey verbatim copies of the Program's source code as you receive it, in any medium, You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you conspicuously and appropriately publish on each copy an appropriate provided that you also convey the machine-readable Corresponding Source under the terms of copyright notice;...
Page 145 >> Software License(Continue) << A "User Product" is either (1) a "consumer product", which means any tangible personal property When you convey a copy of a covered work, you may at your option remove any additional which is normally used for personal, family, or household purposes, or (2) anything designed or permissions from that copy, or from any part of it.
Page 146 >> Software License(Continue) << Additional terms, permissive or non-permissive, may be stated in the form of a separately written An "entity transaction" is a transaction transferring control of an organization, or substantially all license, or stated as exceptions; the above requirements apply either way. assets of one, or subdividing an organization, or merging organizations.
Page 147 >> Software License(Continue) << If you convey a covered work, knowingly relying on a patent license, and the Corresponding 13. Use with the GNU Affero General Public License. Source of the work is not available for anyone to copy, free of charge and under the terms of this License, through a publicly available network server or other readily accessible means, then you Notwithstanding any other provision of this License, you have permission to link or combine any must either (1) cause the Corresponding Source to be so available, or (2) arrange to deprive...
Page 148 >> Software License(Continue) << 16. Limitation of Liability. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES...
Page 149 <<...

This manual is also suitable for:

Lc-55ub30u Lc-43ub30u Lc-50ub30u

Sharp LC-65UB30U Setup Manual

1 Part Names

2 Watching TV

3 Direct Button Operation

4 On-Screen Display Menu

Enjoying Photo/Music/Video Playback

6 Using LINK Operation

7 Using the Internet

8 Using the Miracast Devices

9 Appendix

10 Specifications

11 Trademarks

12 Dimensional Drawings

13 Software License

Quick Links

Troubleshooting

Need help?

Questions and answers

Related Manuals for Sharp LC-65UB30U

Summary of Contents for Sharp LC-65UB30U

This manual is also suitable for:

Table of Contents