Send Information Using Bluetooth - Samsung galaxy tab s User Manual

Disconnect from a Bluetooth Device
1. From home, tap
2. Tap the Bluetooth ON/OFF switch to turn Bluetooth on.
3. Tap the connected device, and then tap OK to disconnect.
Unpair from a Bluetooth Device
You can make your tablet forget its pairing connection with another Bluetooth device. To connect to
the other device again, you may need to enter or confirm a passcode again.
1. From home, tap
2. Tap the Bluetooth ON/OFF switch to turn Bluetooth on.
3. In the Bluetooth devices section, tap

Send Information Using Bluetooth

You can use Bluetooth to transfer information between your tablet and another Bluetooth-enabled
device such as a tablet or notebook computer. The first time you transfer information between your
tablet and another device, you need to enter or confirm a security passcode. After that, your tablet
and the other device are paired, and you will not need to exchange passcodes to transfer information
in the future.
You can send the following types of information, depending on the device you are sending to:
Images and videos
n
Calendar events
n
Contacts
n
Audio files
n
The location where the information is saved depends on the type of information and the receiving
device.
1. Set the receiving device to discoverable mode. You may also need to set it to "Receive Beams"
or "Receive Files". Refer to the device's documentation for instructions on receiving information
over Bluetooth.
2. On your tablet, open the application that contains the information or file you want to send.
3. Follow the steps for the type of item you want to send:
Photos and videos (in Gallery). On the Albums tab, tap an album, tap an item, and then
l
tap Share via > Bluetooth.
Web and Data
Apps > Settings > CONNECTIONS tab > Bluetooth.
Apps > Settings > CONNECTIONS tab > Bluetooth.
next to the device, and then tap Unpair.
52