Do you have a question about the CC430 and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Craig CC430
Page 2
FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 3
LOCATION OF CONTROLS Built-in Speaker Power Button (on the side of unit) Menu/Confirm Button Volume Button Return Button Microphone Reset...
Page 4
Power Button: ● Press and hold to Power On/Off. ● In power On mode, press to turn off the display to enter to standby mode (For saving battery power). Press again to turn back the display. Volume Button: ● In display illuminate mode, touch to enter to volume setting menu.
Page 5
POWER SOURCE The unit has a built in DC 3.7V, Li-poly rechargeable battery, recharge it before first time use (or when the battery was consumed, “ ” appear on the display) as follows: 1. Take out the unit from the watch strap as the figure below very carefully: Fig A Fig B...
Page 6
2. Connect the small plug from the supplied USB Charging Cable to the Micro USB Port on the unit. 3. Connect the full size USB plug to the USB port on a computer or any USB charger having DC 5V output as the figure below.
Page 7
APPS (APPLICATIONS) INSTALLATION Android Phones: If you are using Android phones, download and install the app “Craig Smart Watch” from Google Play into your cell phone before first time use. Compatible Android Phones List: Samsung: Galaxy S3/S4/S5, Note II/III/IV LG: Nexus4/5/7 And newer version and other brands Android phones, for details, please consult the phone's shop.
Page 8
In first time use, pairing the unit to your cell phone as below: 1. After installed the apps from Google Play store into your cell phone, find the app “Craig Smart Watch” in your phone then open it, the follows picture will appear on the screen: NOTE: If touch “Register Later”...
Page 9
2. Touch the “Registration” Button on the screen to enter. Then start to register your personal information into the phone as the on screen instructions as below. (Make sure the phone number you enter is the real phone number of your cell phone.) Phone Nicknames Password...
Page 10
3. Touch the “YES” Button on the screen to enter. Then start to set your personal information: ~ Weight: Set or reset your weight in lbs. ~ Height: Set or reset your height in inch. ~ Birthday: Set or reset your birthday (age). ~ Email Address: Set or reset your email.
Page 11
4. When finished, touch the “Start experiencing” Button to save the setting and exit. The follows picture will appear.
Page 12
NOTES: ~ Slide the picture upward to find more selections. ~ After set or reset, make sure the switch of "Craig Smart Watch" is turned to On. Otherwise, BT connection will be not functioning.
Page 13
6. When finished setting, touch the "Accessibility" Button on the left-top corner of the screen. The follows picture will appear.
Page 14
7. Touch the “Unbond” Button, the follows picture will appear on the screen and your cell phone will start to searching the available BT devices. When our model number CC430 appear on the list, touch it to start BT pairing as on screen instructions.
Page 15
8. After paired, touch the return button on your phone to return to home page. The follows picture will appear.
Page 16
9. Slide the picture to right or touch the “ ” Button on left-top of screen to enter to setting menu, the following picture will appear. Set or reset the settings or read the records as on screen instructions.
Page 17
10. Touch the “ ” Button on right-top of screen to enter to sharing menu, then share your records as on screen instructions. IMPORTANTS: ~ After BT paired, the current time of the unit will auto set to the same time of your cell phone. ~ Ever times when your set or reset the settings, make sure you have synchronized the new setting to the unit.
Page 18
OPERATION General: 1. Press and hold the Power Button on the unit until the display is illuminated to turn On. 2. For saving battery power, the display will auto turn off over 20 seconds idle. Or, press and release the Power Button to turn off the display.
Page 19
MENU BLUETOOTH: ● Touch Bluetooth Buttun to enter, the follow picture will appear. Set or reset the settings as the on display instructions as below: ● BT Sync: Search and pair to the searched Bluetooth devices. ● Bluetooth Settings: Connect or disconnect the Bluetooth connection.
Page 20
DIALER: ● Enter the phone number by touching the numeric buttons. Touch the Button on the display to start dialing through the BT connected cell phone. ● When hook off, speak to the built-in microphone and hearing the sound from the built-in speaker. ●...
Page 21
CAMERA: ● Remote control to take photos through the camera in the connected cell phone. SETTING: ● Enter to set or reset the settings of Language, Alarm or LCD Backlight. ● Enter to “About Watch” to read the version of firmware. ANTI-LOST: ●...
Page 22
ALTIMETER: ● Altitude meter, enter to reset the altitude you located then measuring the altitude level of the unit you placed or in new location later. PEDOMETER: ● Enter “Pedometer” to start counting. ● Enter “Step Setting” or “Weight Setting” to set or reset the settings.
Page 23
1. Turn on the BT setting menu on your iphone then start BT searching. 2. When searched the unit, our model number "CC430" will appear on the list. Touch it to start pairing as the on screen instruction on your iphone..
Page 24
IMPORTANTS 1. Please always wear the unit on your hand and power it on. Otherwise, the records and counting cannot show the real status of your exercise data. 2. Always synchrony the exercise records into your BT connected cell phone after finished exercise. Otherwise, the old records will be auto cover by new data.
Need help?
Do you have a question about the CC430 and is the answer not in the manual?
Questions and answers