Operation; Listening To The Radio; Setting Time - Ricatech RKR50 User Manual

OPERATION

Storage battery
The storage battery is designed to keep the present time and the alarm time in the memory in case of a power failure. Thus
after a power failure you will not have to reset the time and you can rely on being awakened if the power is resumed before
the set alarm time.
It is advisable to replace the storage battery once per year to safeguard operation without problems.
For this you will need a 9v block battery (type 6LR61).This battery is not included in the standard delivery.
Mains connection
Place the plug in a 230v-50Hz power outlet.

LISTENING TO THE RADIO

6. Place the function switch of the radio (on the left side of the set) in the ON position. The control light RADIO ON
indicates that the radio is turned on.
7. Turn the VOLUME control knob clockwise till you hear a click and set the radio to the desired sound level. Turn the
volume control knob counter-clockwise till it clicks to turn the radio off again.
8. Select the desired station with the frequency regulator TUNING. On the frequency range you will see which radio
station frequency is currently selected.
9. You should pull out and unwind the entire cable antenna for a better reception.
10. Place the function switch of the radio (on the left side of the set) in the OFF position to turn the radio off. The control
light RADIO ON will go off.

SETTING TIME

Important: In setting the time the countdown has to be switched off.
This means that the TIMER switch has to be set in the OFF position.
5. Hold down the TIME button.
6. At the same time press down the HOUR button to set the right hour.
7. Then, while holding down the time button, press down the MIN button to set the minutes.
8. Release the TIME button. The time is now set.
ALARM
Your clock radio has an alarm function.
You can be awakened by either the radio or an alarm signal.
Setting the alarm time
Important: In setting the alarm time the countdown has to be switched off. This means that the TIMER switch has to be set
in the OFF position.
5. Hold down the ALARM button. On the display the alarm time that is set will appear.
6. At the same time press down the HOUR button to set the right hour.
7. Then, while holding down the alarm button, press down the MIN button to set the minutes.
8. Release the ALARM button when the correct alarm time is set.
The display will return to the time display.
Awaken to an alarm signal
3. Turn the VOLUME knob clockwise till you hear the click.
4. Place the function switch of the radio (on the left side of the set) in the AUTO position.
The control light of the alarm AUTO indicates that the alarm is operational.
Instruction: The volume of the alarm signal cannot be adjusted.
Awaken to the radio
5. Place the function switch of the radio (on the left side of the set) in the ON position.
6. Select with the frequency regulator TUNING the desired station to which you want to wake up.
7. Set the sound level with the VOLUME regulator to a wake up volume that is pleasant to you.
8. Place the function switch of the radio (on the left side of the set) in the AUTO position.
The control light of the alarm AUTO indicates that the alarm is operational.