Panasonic DMC-FX50 Operating Instructions Manual page 60

Hide thumbs Also See for DMC-FX50:
Table of Contents

Advertisement

Downloaded from ManualsCamera.com Manuals
Advanced
Finishing setting the home area
• If you are setting the home area for the
first time, the screen returns to the screen
shown in step
of "Setting the home
area [HOME]" after you press [MENU/
SET] to set your home area. Move
return to the screen shown in step
then press [MENU/SET] to close the
menu.
• If you are setting the home area for the
second time etc., the screen returns to the
3
screen shown in step
after you press
[MENU/SET] to set your home area.
Press [MENU/SET] again to close the
menu.
Setting the travel destination area
1
2
3
(Perform steps
,
and
.)
Move
to select [DESTINATION] and
then press [MENU/SET] to set.
WORLD TIME
DESTINATION
HOME
--:-- --. --.----
CANCEL
SELECT
SET
MENU
: Depending on the setting, the time at
the travel destination area or the
home area is displayed.
• If you are setting the travel destination
area for the first time, the date and time
are displayed as shown in the screen
above.
Move
/
to select the area the travel
destination is in and then press [MENU/
SET] to set.
10:00
0:00
Seoul
Tokyo
+14:00
CANCEL
MENU
SELECT
SET
60
VQT0Y19
• The current time at the selected travel
destination area is displayed on the top
right of the screen and the time
difference from the home area is
displayed at the bottom left of the
to
screen.
3
and
• If daylight saving time [
the travel destination, move
time advances by one hour.) Move
again to return to the original time.
• The names of major cities in the
selected area are displayed. Also, the
time difference between the selected
area and the home area is displayed on
the bottom left of the screen. (Refer to
P61 for information about the names of
the major cities that are displayed.)
Press [MENU/SET] to close the menu.
SETUP
CLOCK SET
WORLD TIME
MONITOR
GUIDE LINE
TRAVEL DATE
SELECT
MENU
• The icon changes from [
/SET
after setting the travel destination.
• Return the setting to [HOME] when the
vacation is finished by performing steps
1
2
3
,
,
and then steps
"Setting the home area [HOME]". (P59)
• If you cannot find the travel destination in
the areas displayed on the screen, set by
the time difference from the home area.
• The [WORLD TIME] setting also affects
simple mode [
].
MENU
/SET
] is used at
. (The
1
/
4
MENU
0
/SET
OFF
MENU
EXIT
] to [
]
and
of

Advertisement

Table of Contents
loading

Table of Contents