Bluetooth Settings Operations
Enable Bluetooth: From Bluetooth settings, tap On/Off.
n
When enabled, confirmation appears for your phone to be discoverable by other devices.
l
Follow the prompts.
Change Your Phone Name: From Bluetooth settings, tap More > Rename device, enter a
n
new name, and tap Done.
This changes the name of your phone as seen by other devices.
l
Pairing Bluetooth Devices: Make sure the other devices are set to be discovered. From
n
Bluetooth settings, tap the device name in "Available devices" and follow the prompts.
Depending on the device, you may be required to enter or accept a passkey.
l
If the target device does not appear, tap Scan to search again.
l
This setting is available when Bluetooth is enabled.
l
Change the Name of a Paired Device: From Bluetooth settings, tap Settings
n
paired device name, tap Rename, enter a new name, and tap Rename.
Emoji cannot be used in a device name.
l
This setting is available when Bluetooth is enabled.
l
Canceling Pairing: From Bluetooth settings, tap Settings
n
and then tap Unpair.
This setting is available when Bluetooth is enabled.
l
Enable Service from Paired Device: From Bluetooth settings, tap Settings
n
paired device name, and then tap a listing.
If a confirmation prompt appears, follow the prompts.
l
This setting is available when Bluetooth is enabled.
l
This setting is available when the paired device is providing a service.
l
Tap the setting to toggle On/Off.
l
Search for Other Devices: From Bluetooth settings, tap Scan.
n
This setting is available when Bluetooth is enabled.
l
Check Files Received Using Bluetooth Transfer: From Bluetooth settings, tap More >
n
Received files, and then follow the prompts.
Settings
next to a
next to a paired device name,
next to a
200