Table of Contents
Advertisement
Recording TV
programmes
You can record Digital TV programmes and
store then on the HDD.
Recording scrambled and FTA channels will
be proceeded separately. In case of Scrambled
channel, this channel will be recorded with
encryption. Also, recorded scrambled channel
is not available to copy or play on the other
units.
Normal Recording
1. Use PR ( U / u ) to select a programme you
want to record.
2. Press
REC to start recording.
z
Press X to pause recording, press X again
to resume recording.
3. Press x to stop recording. To stop recording,
you must move to the programme being
recorded before pressing x.
NOTE
• The TV screen turns black with stop mark caused
by no signal, Scramble, rating lock recording is
not available.
•
Pay channel can not be recorded correctly if you
don't insert CI or CI+ CAM.
•
You should unlock parental rating of CI CAM if
you want to use timer record correctly.
•
When you record pay channel, recorded title can
be divided in to several titles according to CAM
authetication.
•
Some of title can not be played well if title is
recorded when CAM is not authenticated by this
recorder.
•
During the recording, it is unable to change
channel.
HR558SC-P.BDEULLK_ENG.indd 49
Timer Recording (Manual)
You can set the timer for a total of 32
programmes, up to 22~28 days in advance.
1. While watching TV, press TIMER REC.
2. Use U / u / I / i to select the date to record,
and press ENTER ( ).
3. Select an item using I / i and adjust it
using U / u . You can use numbered buttons
to change the setting.
The adjustable items are listed below.
Start time
Sets the start time.
End time
Sets the end time.
Channel
Sets the programme position.
(If you want to display more
channels, press PR LIST)
Repeat
Choose a desired repeat mode.
(Once, Daily, Weekly or Mon-Fri)
NOTE
• The timer recording can be set from 3 minutes
after the current time.
• Timer recording is not available on a USB device.
•
You should unlock parental rating of CI or CAM if
you want to use timer record correctly.
4. Press ENTER ( ).
5. Select [OK] then press ENTER( ).
If you input the wrong information, an
error message will appear and the timer
recording cannot be made.
Operation
49
4
10. 8. 20.
8:16
Advertisement
Table of Contents
