Table of Contents
Advertisement
5. Regulatory Infomation
5. Regulatory Information
CE Declaration of Conformity
This product is in conformity with the following
standards
•
EN60950-1:2006+A11:2009+A1:20
10+A12:2011 (Safety requirement of
Information Technology Equipment).
•
EN55022:2010 (Radio Disturbance
requirement of Information Technology
Equipment).
•
EN55024:2010 (Immunity requirement of
Information Technology Equipment).
•
EN61000-3-2:2006 +A1:2009+A2:2009
(Limits for Harmonic Current Emission).
•
EN61000-3-3:2008 (Limitation of Voltage
Fluctuation and Flicker) following provisions
of directives applicable.
•
2006/95/EC (Low Voltage Directive).
•
2004/108/EC (EMC Directive).
•
2009/125/EC (ErP, Energy-related Product
Directive, EU 617/2013 Implementing)
•
2011/65/EU (RoHS Directive)
And is produced by a manufacturing
organization on ISO9000 level.
EN 55022 Compliance (Czech Republic Only)
Polish Center for Testing and Certification
Notice
The equipment should draw power from a
socket with an attached protection circuit (a
three-prong socket). All equipment that works
together (computer, monitor, printer, and so on)
should have the same power supply source.
The phasing conductor of the room's electrical
installation should have a reserve short-circuit
protection device in the form of a fuse with a
nominal value no larger than 16 amperes (A).
To completely switch off the equipment, the
power supply cable must be removed from the
power supply socket, which should be located
near the equipment and easily accessible.
A protection mark "B" confirms that the
equipment is in compliance with the protection
usage requirements of standards PN-93/T-42107
and PN-89/E-06251.
18
Advertisement
Table of Contents
