Settings; Settings Application Settings; Application Settings; Device And Sim Card Security - Nokia C5-00 User Manual

Settings

Application settings

Select Settings
>
Applications.
Select an application from the list to
adjust its settings.

Device and SIM card security

Select Settings
>
Security.
To change the PIN code, select
SIM card PIN code. The new code must
>
be 4 to 8 digits long. The PIN code protects
your SIM card against unauthorised use
and is provided with the SIM card. After
three consecutive incorrect PIN code
entries, the code is blocked, and you need
to use the PUK code to unblock it before
you can use the SIM card again.
To set the keypad to lock automatically
after a defined period, select
SIM card Keypad autolock
>
To set a time-out period after which the
device is automatically locked and can be
used only if the correct lock code is
entered, select Phone and SIM card
Phone autolock period. Enter the length
of the time-out period in minutes, or
select None to deactiveate the autolock
feature. When the device is locked, you
can still answer incoming calls, and calls
may still be possible to the official
emergency number programmed into
your device.
To change the lock code, select
and SIM card Lock
>
lock code is 12345. Enter the current code
© 2010 Nokia. All rights reserved.
Settings and
>
General
> >
Phone and
Phone and
period.
>
Phone
code. The default
and then the new code twice. The new
code must be 4-255 characters long.
Alphanumeric (uppercase and lowercase)
characters can be used. The device notifies
you if the lock code is not properly
formatted.

Common accessory settings

Select Settings
>
General > Enhancement.
With most accessories, you can do the
following:
To define which profile is activated when
you attach an accessory to your device,
select the accessory and
To set the device to answer phone calls
automatically after 5 seconds when an
accessory is attached, select
answer > On. If the ringing type is set to
Beep once or Silent
profile, automatic answering is disabled.
To illuminate the device while it is
attached to an accessory, select
On.
The available options may vary depending
on the accessory.

Restore original settings

To restore the original device settings,
select Settings
>
General Factory
>
you need your device lock code. After
resetting, the device may take a longer
time to switch on. Documents, contact
Settings
Settings and
>
Default profile.
Automatic
in the selected
Lights
Settings and
>
settings. To do this,
77
>