Table of Contents
Advertisement
CPL Installation (Optional)
CPL: Circular-Polarizing Filters can reduce the reflection from the inside of the
car window
With the CPL in place, rotate the ring to
achieve the best effect from the polarization
through the windscreen.
Power Connection
Connect the USB charger to the USB port (21) on the camera holder. Connect
the other end to the 12V outlet (e.g. cigarette lighter) in your vehicle. The
camera will power on automatically once the 12V outlet is turned on.
Note: There are 2 Mini USB ports on the device. One on the camera holder
and one on the camera. If you connect the power to the one on the camera,
only the camera will be powered. If you connect the power to the one on the
camera holder, both the camera and GPS module will be powered.
Install the CPL onto the device by
screwing on to bezel.
7 of 17
Advertisement
Table of Contents
