Nokia 9210 User Manual page 247

242
©2001 Nokia Mobile Phones. All rights reserved.
Disconnect the data call, wait for a couple of minutes, and retry the
connection. If the connection still does not succeed, contact your Internet
Service Provider.
4 If your data call is unexpectedly dropped, this may be a case of poor network
conditions, congestion in the phone network, or a too low inactivity period
setting.
If you are unable to connect to the Internet after repeated attempts, and have
successfully used your Internet connection previously, or get error messages when
starting the WWW browser, remove and replace the battery and try again.
12. Infrared problems
The communicator may be connected to a PC, laptop, printer, digital camera,
wireless phone or another communicator via the infrared connection.
If you are using the PC Suite for Nokia 9210 Communicator program on your PC,
or if you want to receive data from another communicator or a digital camera, you
must activate the Infrared connection on your communicator before the
connection is made. See PC Suite Guide in the sales package CD-ROM and 'To
activate the infrared connection' on page 35 of this guide.
The PC to which you want to establish the connection must have an IrDA
compatible infrared port; installed and activated IrDA drivers; and Microsoft
Windows 95/98/98SE/Me. For more information on IrDA drivers and their use in
Windows, contact Microsoft.
If you have an IBM Thinkpad laptop with Windows 98 SE installed, you may
encounter problems with infrared connections. If problems occur, proceed as
follows:
1 Click the Windows Start button and select Settings > Control Panel.