Configure The Router - D-Link DSL-504G Quick Installation Manual

Now that your IP settings have been changed, you can access the configuration software using your computer's web
browser. If the browser software on the computer you are using is configured to use a proxy server for Internet access, it is
necessary to first disable the proxy connection. Computers used on corporate networks or computers that use special Internet
security and other software are sometimes set up to use a proxy server for the web browser.
Check for Proxy
In Windows Internet Explorer, you can check if a proxy server is enabled using the following procedure:
1. In Windows, click on the START button, go to Settings and choose Control Panel.
2. In the Control Panel window, double-click on the Internet Options icon.
3. Click the Connections tab and click on the LAN Settings button.
Verify that the "Use proxy server" option is NOT checked. If it is checked, click in the checked box to deselect the
4.
option and click OK.
To use the web-based management software, launch your web browser software and use the LAN IP address of the Router to
access the management software. The default LAN IP address of the Router is used in the Address bar of your web browser
window. Type in http:// followed by the default IP address, 10.1.1.1 in the address bar of the browser. The URL in the
address bar should read: http://10.1.1.1
A new window appears prompting you for a user name and password needed to gain access the web configuration manager.
Use the default user name: admin and password: admin for first time set up.
The first web page you will see when you successfully login is the System View page. This page can be used later, once you
have a connection established. The menu you need to establish the ADSL connection is the Quick Configuration menu. This
menu is located in the Home folder located on the left hand side of your browser window. Open this folder by clicking on it
twice.

Configure the Router