Data Transfer And Synchronization; Data Transfer With A Device - Nokia 8800d User Manual

S e t t i n g s
Menu > Settings
> Packet data > Packet data
settings > Active access
activate the access point you want
to use, and select Edit active
access point. Select
access point, and enter a nick
name for the currently selected
access point. Select
access point, and enter the access
point name (APN) to establish a
connection to a packet data
network.
You can also set the dial-up
service settings (access point
name) on your PC using the Nokia
Modem Options software. See
Suite," p. 89. If you have set the
settings both on the PC and on
your phone, the PC settings are
used.
Data transfer and
synchronization
Synchronize your data from
calendar, notes, and contacts with
another compatible device (for
example, a mobile phone), a
compatible PC, or a remote
Internet server (network service).
Partner list
To copy or synchronize data from
your phone, the name of the
device and the settings must be in
the list of partners in transfer
60
Copyright © 2006 Nokia. All rights reserved.
> Connectivity
point,
Alias for
Packet data
"PC
contacts. If you receive data from
another device, for example, a
compatible mobile phone, the
partner is automatically added to
the list, using the contact data
from the other device.
and PC sync are the original items
in the list.
To add new partner to the list, for
example a new device, select
Menu > Settings
> Data transfer >
transfer contact
Phone copy, and enter the
settings according to the transfer
type.
To edit the copy and synchronize
settings, select a contact from the
partner list, and select
Edit.
To delete a selected partner, select
Options > Delete.

Data transfer with a device

For synchronization Bluetooth
wireless technology is used. The
other device is in the standby
mode.
To start a data transfer, select
Menu > Settings
> Data transfer and the transfer
partner from the list, other than
Server sync and PC
According to the settings, the
Server sync
> Connectivity
Options > Add
> Phone sync or
Options >
> Connectivity
sync.