Page 2
Introduction The iceQ Stainless Steel Ice Cube Maker is a stylish product used to make ice cubes. With a sleek, stylish appearance, as well as an antiseptic internal material, it is suitable for long-term use. The automatic ice-making system processes the ice cubes in uniform shape stably.
Page 3
II. Components’ Names ① Transparent window ② Cover ③ Operation panel ④ Air outlet ⑤ Air inlet ⑥ Power cord ⑦ Water outlet ⑧ Ice storage box ⑨ Evaporator ⑩ Ice making box III. Safety precautions 1. The power source must be suitable for the standards of Ice maker. UK 230-240 AC Volts. 2.
Page 4
IV. Place environment 1. Place the Ice Maker securely onto a sturdy and even surface. 2. Make sure the unit is placed away from heat sources and avoid direct sunlight. 3. The Ice maker should work in a place in a well ventilated area. Ensure that a minimum space of 20cm from Ice maker’s air outlet and inlet is not obstructed.
Page 5
1) Real Time Setting: Press the SET button once, hour blinking, press the ▲ button to set hour, press the SET button once, minutes flash, press the ▲ button to set minutes. 2) The timing for the machine start on time setting: press the SET button 3 times, hour blinking, press the ▲...
Page 6
stand-by mode. Proceed to drain the water from the internal reservoir by removing the rear drain cap and plug. Leave the lid on the ice maker open to allow it to air dry. Please note if there is a water shortage during Self-cleaning mode, the unit will automatically go into stand-by mode;...
Need help?
Do you have a question about the ICEQIMSS and is the answer not in the manual?
Questions and answers