Security - Nokia 6234 User Manual

Select Menu > Settings
Default config. settings
select Details to view the applications that the configuration settings of this service provider support. To set
the configuration settings of the service provider as default settings, select
configuration settings, select Delete.
Activ. default in all apps.
Preferred access point
to view the name of the service provider, data bearer, and packet data access point or GSM dial-up number.
Connect to serv. support
supported by the service provider
Personal config. settings
To add a new personal account if you have not added any, select Add; otherwise, select
Select the service type, and select and enter each of the required parameters. The parameters differ according
to the selected service type. To delete or activate a personal account, scroll to it, and select
Activate.

■ Security

When security features that restrict calls are in use (such as call barring, closed user group, and fixed dialing) calls still may
be possible to the official emergency number programmed into your device.
Select Menu > Settings
PIN code request and UPIN code request
phone is switched on. Some SIM cards do not allow the code request to be turned off.
PIN2 code request — to select whether the PIN2 code is required when using a phone feature that is protected
by the PIN2 code. Some SIM cards do not allow the code request to be turned off.
> Configuration and from the following options:
— to view the service providers saved in the phone. Scroll to a service provider, and
— to activate the default configuration settings for supported applications
— to view the saved access points. Scroll to an access point, and select
— to download the configuration settings from your service provider if this is
— to add new personal accounts for various services, and to activate or delete them.
> Security and from the following options:
— to set the phone to ask for your PIN or UPIN code every time the
Copyright © 2006 Nokia. All rights reserved.
Options > Set as default. To delete
Options
Options >
Options
> Details
Add new.
> Delete or
111