Connecting The Speaker Cables; Connecting The Speakers - Pioneer SC-LX87 Quick Start Manual

Hide thumbs Also See for SC-LX87:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Connecting up
Important
Illustration shows the SC-LX87, however connections for the SC-LX77 are the same except
where noted.

Connecting the speakers

The receiver will work with just two stereo speakers (the front speakers in the diagram) but using
at least five speakers is recommended, and a complete setup is best for surround sound.
To achieve the comfortable surround sound, install your speakers as shown below.
7.1 channel surorund system:
R
L
SR
C
SW
SBR
SL
SBL

Connecting the speaker cables

Make sure you connect the speaker on
the right to the right (R) terminal and the
speaker on the left to the left (L) terminal.
Also make sure the positive and negative
(+/–) terminals on the receiver match those
on the speakers.
1
Twist exposed wire strands together.
2
Loosen terminal and insert exposed wire.
3
Tighten terminal.
1
2
3
10 mm
L – Front Left
C – Center
R – Front Right
SL – Surround Left
SR – Surround Right
SBL – Surround back Left
SBR – Surround back Right
SW – Subwoofer
Note
There are also other speaker connection
patterns (front height, front wide, etc.).
For details, see page 19 of the operating
instructions.
CAUTION
Before making or changing
connections, switch off the power and
disconnect the power cord from the AC
outlet.
These speaker terminals carry
HAZARDOUS LIVE voltage. To prevent
the risk of electric shock when
connecting or disconnecting the
speaker cables, disconnect the power
cord before touching any uninsulated
parts.
After installing the speakers, connect them as shown below.
Front Right
Subwoofer
(R)
(SW)
LINE LEVEL
INPUT
FRONT
SUBWOOFER
1
CENTER
A
FRONT
CENTER
FRONT HEIGHT
R
L
R
SPEAKERS
Surround Right
(SR)
Surround back Right
(SBR)
Note
When only connecting one surround back speaker, connect it to the SURROUND BACK L
(Single) terminals.
This unit supports speakers with a nominal impedance of 4
Center
Front Left
(C)
(L)
SURROUND SURR BACK F HEIGHT
F WIDE
2
(Single)
L
R
PRE OUT
FRONT WIDE /
B
SURROUND
SURROUND BACK
L
R
L
R
L
R
Surround Left
(SL)
Surround back Left
(SBL)
to 16 .
A
L
(Single)
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sc-lx77

Table of Contents