Advertisement
5
WEDGE CLEANING TOOL ASSEMBLY
5
Slide the wedge shaped cleaning pocket over the
wedge cleaning tool frame until it is completely on.
6
Secure the cleaning pocket onto the frame. Close the
cinch by pulling on the elastic band and sliding the
locking bean to tighten.
Cleaning Tip: The wedge cleaning pocket was designed
for cleaning a variety of surfaces and is exceptional on
those that are large and flat, both horizontal and vertical.
Broad cleaning sides and super absorbent microfibre
fabrics loosen, lift, and lock in dirt and grime while
sanitising at the same time.
6
Cleaning Tip: The wedge tip and squared edges reach
into tight areas often missed or difficult to reach with
traditional cleaning methods. The wedge sides concave
to wrap around sink and faucet fixtures, door knobs,
and other small curved surfaces leaving them clean all
around. Multiple sides provide more surface cleaning
area and allow one to clean with one side and finish
with the other for a "NOW YOU KNOW THAT'S CLEAN"
performance. Surface examples for use are countertops,
tabletops, cabinets, walls, floor spot cleaning, bathroom
fixtures and more.
CAUTION: It is recommended that you allow the
cleaning pockets to cool off before removing
them from the wedge or cylinder tools to avoid
possible scalding injury.
CUSTOMER CARE - AU: 1800 890 840
8
Hide quick links:
Advertisement
