Getting Started; Safety Information - Samsung HW-J6500R User Manual

GETTING STARTED

GeTTInG STarTeD

SafeTy InformaTIon

Safety WaRningS
To reDUCe THe rISK of eLeCTrIC SHoCK, Do noT remoVe THe CoVer (or BaCK).
no USer-SerVICeaBLe ParTS are InSIDe. refer SerVICInG To QUaLIfIeD SerVICe PerSonneL.
CaUtiOn
RiSK Of eLeCtRiC SHOCK.
DO nOt OPen.
Class II product : This symbol indicates that it does not require a safety connection to electrical
earth (ground).
aC voltage : This symbol indicates that the rated voltage marked with the symbol is aC voltage.
DC voltage : This symbol indicates that the rated voltage marked with the symbol is DC voltage.
Caution, Consult instructions for use : This symbol instructs the user to consult the user manual for
further safety related information.
WaRning : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CaUtiOn : To PreVenT eLeCTrIC SHoCK, maTCH WIDe BLaDe of PLUG To WIDe SLoT, fULLy InSerT.
• This apparatus shall always be connected to a aC outlet with a protective grounding connection.
• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be
readily operable.
CaUtiOn
• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on the apparatus.
• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be
easily and readily accessible at all times.
Wiring the Main Power Supply Plug (UK Only)
iMPORtant nOtiCe
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is
indicated on the pin face of the plug and if it requires replacing, a fuse approved to BS1362 of the same rating must
be used. never use the plug with the fuse cover removed. If the cover is detachable and a replacement is required,
it must be of the same colour as the fuse fitted in the plug. replacement covers are available from your dealer. If the
fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point,
you should obtain a suitable safety approved extension lead or consult your dealer for assistance. However, if there is
no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the plug to a
mains socket as there is a risk of shock hazard from the bared flexible cord. never attempt to insert bare wires directly
into a mains socket. a plug and fuse must be used at all times.
iMPORtant
The wires in the mains lead are coloured in accordance with the following code:– BLUe = neUTraL BroWn = LIVe
as these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as
follows:– The wire coloured BLUe must be connected to the terminal marked with the letter n or coloured BLUe or
BLaCK. The wire coloured BroWn must be connected to the terminal marked with the letter L or coloured BroWn
or reD.
WaRning : DO nOt COnneCt eitHeR WiRe tO tHe eaRtH teRMinaL WHiCH iS MaRKeD WitH tHe
LetteR e OR By tHe eaRtH SyMBOL
This symbol indicates that high voltage is
present inside. It is dangerous to make any kind
of contact with any internal part of this product.
This symbol indicates that important literature
concerning operation and maintenance has
been included with this product.
, OR COLOUReD gReen OR gReen anD yeLLOW.
2