Aligning the appliance doors
The appliance doors can be aligned
with the appliance housing afterwards.
In the following figure, the appliance
door is not closed so that the
individual steps can be seen more
clearly.
Align the bottom door in the bottom
hinge bracket using the outer,
elongated holes:
^ Remove the middle screw a from the
hinge bracket.
^ Loosen the two outer screws b
slightly.
^ Align the appliance door by moving
the hinge bracket to the right or left.
^ Tighten the screws b; screw a does
not need to be screwed on again.
62
Align the top door using the elongated
holes in the middle hinge bracket:
^ Loosen the three screws c slightly.
^ Align the appliance door by moving
the hinge bracket to the right or left.
^ Tighten the screws c.