Timer Recording - Samsung DVD-HR725 Instruction Manual

Video
The disc revolves, but no image or bad quality
images is displayed.
Checkpoint 1
Checkpoint 2
Checkpoint 3
Checkpoint 4
Sound
No sound.
Checkpoint 1
Checkpoint 2
Checkpoint 3
Checkpoint 4
No audio output.
Checkpoint 1
130 - English
Downloaded From Disc-Player.com Samsung Manuals
Be sure that the Video Setting is
properly set. (See pages 40~41)
Check whether there is damage to or
any foreign material on your disc.
Some low quality discs may not play
properly.
If scenes change from dark to bright
suddenly, the screen may shake
vertically temporarily, but this is not a
fault.
Are you watching a programme in
slow or skip mode?
If you are playing a programme at a
speed other than normal speed,
sound will not be heard.
Check the connections and settings.
(See pages 22, 39)
Check whether the disc is damaged.
Clean the disc, if necessary.
Check whether the disc is inserted
correctly with the label facing up.
Check whether you have selected
the correct digital output options in
the Audio Output Options menu.
(See page 39)

Timer Recording

Timer lamp flickers.
Check there is enough space in the
Checkpoint 1
disc or HDD for recording.
Checkpoint 2 Check whether the current disc is
recordable or not.
Make sure to check before the start
time of recording.
Timer recording does not work properly.
Re-check the recording time and the
Checkpoint 1
end time settings again.
Checkpoint 2
Recording will be cancelled if the
power is interrupted due to a power
failure or another similar reason
while recording.
HDMI
No HDMI output.
Check whether the mode is stop
Checkpoint 1
mode or not. You can switch HDMI
mode in stop mode.
Check the Video output is HDMI
Checkpoint 2
enabled.
Check the connection between the
Checkpoint 3
TV and the HDMI jack of the HDD &
DVD RECORDER.
See if your TV supports HDMI.
Checkpoint 4