Advertisement
Quick Links
INSTRUCTIONS FOR VOICE CONTROLLED TALKING ALARM CLOCK
TIM-230-520-2030
User Instructions:
Note: When the clock is connected to the provided AC Adapter, the Voice
Trigger mode must be active. This will enable you to use the command, "Hello
Moshi" to identify the time, date, temperature and much more. After following
the instructions below, check that the "Voice Trigger" switch is in the 'on' position.
When using the clock on battery power, the voice trigger mode is disabled
and the screen must be pressed to activate all voice interactive commands.
This clock has four different alternating color backgrounds for speaking,
listening and temperature. The night light will alternate in 6 colors.
The display turns red when the inside temperature is 90 F and above,
or if a function is not working properly.
The display turns green when the inside temperature is between 70
and 89 F, or when the clock is listening.
The display turnss light blue when the inside temperature is between
60 and 69 F.
The display turns dark blue when the inside temperature is 59 F and
below, or when the clock is talking.
Activation List of Spoken Commands:
To start using the clock either when using the provided AC Adapter or while
using the batteries, please begin your interaction with the clock with the
following steps:
1. Say "Hello Moshi", then the clock will will respond with:
"Welcome, command please"
Use any of the following voice commands:
"Time" – The clock will respond "the time is (current time)."
Advertisement
Related Manuals for Cnib TIM-230-520-2030
Summary of Contents for Cnib TIM-230-520-2030
- Page 1 INSTRUCTIONS FOR VOICE CONTROLLED TALKING ALARM CLOCK TIM-230-520-2030 User Instructions: Note: When the clock is connected to the provided AC Adapter, the Voice Trigger mode must be active. This will enable you to use the command, "Hello Moshi" to identify the time, date, temperature and much more. After following the instructions below, check that the "Voice Trigger"...
- Page 2 “Set Time” – The clock will respond “tell me the current time" and, on first usage or after an error. Here is an example of how to correctly say the time: Respond with the current time to set the clock (for example, say “six o’clock pm”).
- Page 3 “Night Light” – This command turns the alternating colors of the night light on and off. “Help” – The clock will respond “you can say (and gives the list of commands)." After saying the words “Hello Moshi”, if you have decided not to say a command just say the word “cancel”.
- Page 4 Start by pressing the “Set” button, (the clock will say the time) then press the “Mode” button to get to the desired mode. Then press the “Up” or “Down” button until you get to your desired time, alarm or date choice. Please note that the date and choice of “F”...
- Page 5 Do not speak at the same time the clock is speaking. Ambient noise may affect the listening operation of the clock. Battery Installation Open the battery cover on the bottom of the clock. Insert 3 “AAA” batteries according to the polarity sign, or where the flat part of the batteries are placed against the springs inside the battery compartment.