iCraig CSH307 Owner's Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Table of Contents

Need help?

Do you have a question about the CSH307 and is the answer not in the manual?

Questions and answers

Summary of Contents for iCraig CSH307

Page 5 This manual contains important safety precautions and information for correct usage. Please be sure to read this manual carefully before use to avoid any damage to the device. Do not place the product in hot, wet or dusty environments. Do not place the product for outdoor usage. Avoid dropping or smashing the product.
Page 6: Location Of Controls
8. Reset (After 15 seconds to return to default setting including password) 9. Antenna 2.GETTING STARTED Congratulations on buying a iCraig Camera. This device will enable you to easily check your loved ones by viewing them while you are away. 1.Initial Setup To get started, you will need: Your wireless router, its network name, and password if necessary.
Page 7 USB jack of connection cable to supplied AC/DC USB Adaptor to wall outlet having AC 100- 240V~, 50/60 Hz. Using the supplied AC/USB Adaptor for Power Supply. Other models charger may damage the device. 3.Download the iCraig SMART App from the App Store or Google Play.
Page 8: Connect At Access Point Mode
IP camera at AP (Access Point) mode. See below: When the iCraig Cam Blue LED light is flashing slowly, Go to “Settings -----> Choose “Wi-Fi” on your Smart Phone or tablet to look for the wifi name similar to “...
Page 9 Connect to your Camera with the Phone or tablet Tap on the Camera wifi name appear on your phone to connect the device. After a success connection, your phone will show the camera WIFI name on your screen as connected wifi.
Page 10: Connection Without Qr Scan
Method 1 – connection without QR Scan (Make sure IP camera Access Point is Connected with Smartphone) Open the APP Choose “+” on the top right screen, then Tap on “Add new online Device”. Tap on “Search(LAN)” , all connected camera will display on your screen. Tap on camera you want to connect and press “OK”...
Page 11: Connect Ip Camera To Wifi Network
Connect IP Camera to WIFI network ” Tap the Setting icon” on Live Cam page (see as below) and choose the “advance Config”. Tap the “WIFI Config” and choose your wifi network by identifying your network name. Input your wifi network password if needed.
Page 12 Tap “OK”, it will display confirmation message if all required wifi name/password is correct. Then touch “OK”, the camera will start to reboot. Once complete, it shows “Device reboot” The new camera will logging in to your home network automatically, wait until the camera appears “online, X User”...
Page 13: Connection By Uid Scan
Method 2 - connection by UID (QR Code) Scan (Make sure IP camera Access Point is Connected with Smartphone) This is another method to connect IP camera by QR code scan, procedure as below: Open the APP Choose “+” on the top right screen, then Tap on “Setup Device WIFI connection”.
Page 14 Locate your QR Code label on the back of wifi camera which is similar to this “ ” use your Smart Phone to aim on the QR code after pressing the QR SCAN icon on the APP screen. Choose your wifi network by identifying your network name Input your wifi network password if needed.
Page 15 Wait until the “Add New Device” icon display on app screen, and then touch it. You can see new connected device shows on “Search Device” page (see below) Tap the new device then Press “OK”, the new camera will logging in, wait until the camera appear “online, X User”...
Page 16: Reset
Reset (Reset button on rear of camera) If you want to connect IP camera with other network or camera works abnormally. You can press and hold “reset button” locate at rear of camera 15 seconds to reset it as manufacturer stage (erase all network data and P2P password will set to manufacturer default (8888).
Page 17: Settings
High The current frame image quality is high Normal The current frame image quality is normal. The quality of the low bandwidth when the current frame image Bandwidth Adjust the brightness Adjust the contrast Open and Close MIC No function Smartphone Screenshot Smartphone Record...
Page 18: Alarm Config
Tap on Advance Configs Set Up: Alarm Config Select motion detection sensitivity by pressing on the icon and sensitivity screen will pop up for you to choose. Choose disable if you do not wish to have this alert. - To set up motion detection by enabling PIR sensor by sliding the icon to the right hand side.
Page 19 To record on your micro SD card (Micro SD is not included) 1. Insert the Micro SD card and format. 2. Choose Record Resolution before using this feature 3. Choose File Length to set your recording time 4. Tap “OK” to enable recording Change P2P password: 8888 - Default password:...
Page 20: Time Setting
Time Setting: To sync with the smart phone and the app on real time by pressing “Device Time Sync with App”.
Page 21: Camera Reboot
Camera reboot: Enable remotely restart the camera. If camera works abnormally, you can do this step to reboot/restart camera.
Page 22: Troubleshooting
9.Mounting Your Camera (optional) Attach screws to wall and hang plate onto screws (Screws and hang plate not included) 10.Troubleshooting Cannot power on the Device Check your power source. Cannot go online Check if your WI-FI setting is correct, proper password may be needed. Check if your router is working properly.
Page 23: Specification
11. Specification PRODUCT SPECIFICATIONS Hardware Features and Specifications Still Image Capture Support VGA and 0.3MP resolution JPEG still capture Video Features Adjust image size and quality Flip and mirror image Audio In Built-in microphone, Audio Compression ADPCM Camera Image Sensor VGA 1/4 inch CMOS sensor Lens Focal length: 2.5mm...