Sony VPL-CX61 Protocol Manual page 50

(VPL-CX100/CX120/CX125/CX150/CX155/CW125)
<Table 3>
Item Number
Item Data
ACK -----
Undefined Command
Size Error
Select Error
Range Over
Not Applicable
NAK
Check Sum Error
Framing Error
Parity Error
Over Rub Error
Other Comm Error
The await-return time of return value is approx. 200 msec.
m
. This is the case, unless the communications are interfered anyway.
. If standby mode is set as "low", the main part of a projector will go into
power-saving mode in about 1 minute after standby.
A command is executed by resending, although "Not Applicable" will
return, if a command is sent into power-saving mode.
46
VPL-CX61/CX63/CX75/CX76/CX80/CX85/CX86/CX100/CX120/CX125/CX150/CX155/CW125/FE40/FE40L/FH300L/FX40/FX40L/FX51/FX52/FX52L/FW300L/PX35/PX40/PX41
Data
Upper byte Lower byte
00h 00h
01h
04h
01h 05h
06h
0Ah
10h
20h
F0h
30h
40h
50h