Connecting Wi-Fi Dongle; Connecting Ir And Light Sensor; Portrait Layout - LG 98ls95a Owner's Manual

Connecting Wi-Fi Dongle

1
Attach the Velcro tape provided with the Wi-
Fi dongle to the back of the set.
2
Connect the Wi-Fi dongle and the set using
a USB cable and then attach the dongle to
the set before using.
NOTE
Refer to the manual of the Wi-Fi dongle.
•
Bluetooth is not supported.
•
Refer to the Installation Menu for region
•
settings.
The wireless reception may be affected by
•
the location of the product.
If there is poor reception in the
•
recommended location, please change the
location before use.
• Use only the provided Wi-Fi dongle. Other
Wi-Fi dongles may not work properly.
ASSEMBLY AND PREPARATION
Connecting IR and Light
Sensor
When you connect the cable to the product, the
feature for receiving remote control signals is
activated. The IR and light sensor is magnetic.
Attach it to the front edge of the product for use.
[Front]
CAUTION

Portrait Layout

When installing in a portrait layout, rotate the
monitor counterclockwise 90 degrees (when
facing the screen).
9
IR&LIGHT
SENSOR
CAUTION