Setup ........5 FCC Information ....10 Sensor Setup ......5 Customer Support ....11 Display Setup ......6 Warranty......11 Select Temperature Units ..6 Questions? Contact Customer Support at (877) 221-1252 or visit www.AcuRite.com. SAVE THIS MANUAL FOR FUTURE REFERENCE.
Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product.
Features & Benefits TEMPERATURE SENSOR 1. High Temperature Record Highest temperature recorded over past 24 hours. 2. Low Temperature Record Lowest temperature recorded over past 24 hours. 3. Integrated Anchor Loop for easy placement. 4. Sensor Low Battery Indicator 5. Current Temperature BOTTOM OF SENSOR 6.
Features & Benefits DISPLAY UNIT 1. High Temperature Record 9. Display Low Battery Indicator Highest water temperature recorded 10. Sensor Signal Strength over past 24 hours. 11. Sensor Low Battery Indicator 2. Current Temperature 3. Low Temperature Record BACK Lowest water temperature recorded over past 24 hours.
IMPORTANT: Screw on the battery compartment ring. compartment ring gasket tightly, to ensure that water does not enter AcuRite recommends high quality the sensor and damage its internal alkaline batteries for the best components. product performance. Heavy duty or rechargeable batteries are not recommended.
Display Unit Setup Set the A-B-C Switch Install or Replace Batteries Locate the A-B-C switch inside 1. Remove the battery the battery compartment. Set compartment cover. the A-B-C switch to A, B or C. 2. Insert 3 x AA alkaline You must select the same letter batteries into the battery choices for both the display unit...
Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and outdoor sensor are critical to the accuracy and performance of this product. Display Unit Placement Place the display unit in a dry area free of dirt and dust.
OPERATION Using the Thermometer Water Temperature History Chart The water temperature history chart lets you monitor the change in conditions over the past 3 days (-3, -2, -1) and over the past 16 hours (-16, -8, -6, -4, -2, -1, 0). Set the Freeze Warning Alarm Press the FREEZE WARNING button to activate the freeze alarm.
5. Let the units sit within a couple feet of each other for about 20 minutes to gain a strong connection. If your AcuRite product does not operate properly after trying the troubleshooting steps, visit www.AcuRite.com or call (877) 221-1252 for assistance.
Care & Maintenance Display Unit Care Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Outdoor Sensor Care Clean with a soft damp cloth. Do not use caustic cleaners or abrasives. Specifications 32ºF to 158ºF;...
Customer Support AcuRite customer support is committed to providing you with best-in- class service. For assistance, please have the model number of this product available and contact us in any of the following ways: (877) 221-1252 info@chaney-inst.com AcuRite 24/7 support at www.
Need help?
Do you have a question about the 617 and is the answer not in the manual?
Questions and answers