Disposal Of Your Old Appliance; Installation - LG GN253VW Owner's Manual

Table of Contents

Advertisement

• Information of fluorinated greenhouse gases
used as refrigerant of this refrigerator.

INSTALLATION

SELECT A GOOD LOCATION
1. Place your refrigerator where it is easy to use.
2. Avoid placing the refrigerator near heat source, direct sunlight or
moisture.
3. To ensure proper air circulation around the fridge-freezer, please
maintain sufficient space on both the sides as well as top and
maintain at least 2 inches (5 cm) from the rear wall.
NEXT
1. Wipe off all dust accumulated during shipping and clean your refrigerator thoroughly.
2. Install accessories such as ice cube box, etc., in their proper places. They are packed together to
prevent possible damage during shipment.
3. Connect the power supply cord (or plug) to the outlet. Don't double up with other appliances on
the same outlet.
4. Prior to use, let the refrigerator run for 2-3 hours. Check the flow of cold air in the freezer
compartment to ensure proper cooling has taken place.Your refrigerator is now ready for use.

DISPOSAL OF YOUR OLD APPLIANCE

1. When this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from
the municipal waste stream via designated collection facilities appointed by
the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please
contact your city office, waste disposal service or the shop where you
purchased the product.
5. Flammable insulation blowing gases should be disposed appropriately .
Take the cabinet and doors to a recovery plant for flammable insulation
blowing gases.
4. To avoid vibrations, the refrigerator must be level. If necessary,
adjust the leveling screw(s) to compensate for unevenness of
the floor. To close the doors easily, the front should be slightly
higher than the rear. Leveling screw(s) can be turned easily by
tipping the cabinet slightly. Turn the leveling screw(s) clockwise
to raise the refrigerator, counterclockwise to lower it.
4
10 inches
or more
2 inch
or more

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents