DEAR USER, The plate is exceptionally easy to use and extremely efficient. After reading the instruction manual, operating the cooker will be easy. Before being packaged and leaving the manufacturer, the plate was thoroughly checked with regard to safety and functionality. Before using the appliance, please read the instruction manual carefully.
TABLE OF CONTENTS Basic information....................2 Safety instructions....................4 Saving energy.......................5 Unpacking.......................5 Taking out of use....................5 Description of the appliance................6 Installation ......................7 Operation ......................8 Before first use of cooking plate................8 Proper cookware ....................8 Touch control sensor panel layout..............9 Switching on the appliance..................9 Switching on the cooking zones..............9 Setting the heating power ................10 Automatic warm-up function ..............11...
SAFETY INSTRUCTIONS ● Before using the ceramic plate for the first time read the Operating Manual carefully as thus you can ensure safe operation and avoid damage to the plate. ● If the ceramic plate is operated near a radio, TV set or other emitting device, please check whether the touch panel works correctly.
SAvING ENERGY UNPACKING The appliance is protected Everybody who properly from damage during transpor- uses energy not only saves tation by its packaging. After money but also consciously unpacking please dispose acts in aid of the natural of the packing materials in a environment.
DESCRIPTION OF ThE APPLIANCE Description of KK 3400-10 hob Rear cooking zone Ø 180 Front cooking zone Ø 145 Touch control sensor panel layout 1. On/off sensor 6. Child lock sensor with LED pilot light, 2. Cooking zone selector sensor, 7.
INSTALLATION KK 3400-10 Installation of plate ● prepare the place (ope ning) in the top of the fur ni tu re ele ment ac cor ding to the dimensions shown in the assembly drawing (Fig. A) ● the minimum free space to be left under the ceramic plate is 80 mm ●...
OPERATION Before first use ●carefully clean the ceramic plate treating it as a glass surface, ●when used for the first time the plate can give off a bit of a smell so switch on the ventilation system or open the window, ●operate the plate observing the safety instructions.
OPERATION Touch control sensor panel layout When the cooking surface is connected to the electricity mains, the pilot light should light up briefly above the child lock sensor field (6), after which the appliance can be switched on. No objects should be placed on the sensor fields (this could cause an error). Touch sensor fields should be always kept clean.
OPERATION 2. Set the desired heat setting using the (+) (5) or (-)(4) sensor fields, 3. To change the heat setting again as described in point 1, select the desired cooking zone using the cooking zone selector sensor field (2), and then set the desired heat setting using the (+)(5) or (-) (4) sensor fields.
OPERATION Automatic warm-up function Each cooking zone is equipped with an auto- matic warm-up function. When this is activa- ted, then the given cooking zone is switched on at full power for a time depending on the heat setting selected, and is then switched back to the heat setting originally set.
OPERATION Switching off selected cooking zone Selected cooking zone may be switched off in the following way: 1. Select the desired cooking zone using the cooking zone selection sensor field (2). 2. Then simultaneously touch (+)(5) and (-) (4) sensor fields, or use the (-)(4) sensor field to lower the setting to „0”.
OPERATION Residual temperature indicator When a hot plate has been switched off, letter “H” is displayed indicating that the hotplate is still hot. Do not touch the hotplate and do not put heat-sensitive objects on it when the “h” letter is displayed as you can burn yourself or melt the object! When the indication goes out you can touch the hotplate, bearing in mind that it still does...
OPERATION Timer If the appliance is equipped with a timer, it can be used to set the operating time of any cooking zone. Select the desired cooking zone using the cooking zone selector sensor field (2) and then touch the timer sensor filed (7) as many times as necessary until a pilot light (9) comes on indicating the desired cooking zone (2).
CLEANING AND ROUTINE MAINTENANCE Daily cleaning and proper maintenance have crucial impact on the durability of your ceramic plate. Clean the ceramic plate observing the same rules as for glass. Never use abrasive or aggressive clean- ing agents, scrubbing powders or scratching sponges.
Page 16
CLEANING AND ROUTINE MAINTENANCE Never apply cleaning agent on a hot hotplate. Caution! Leave the cleaning agent to dry and then If from any reason you are not able wipe it off with a wet cloth. Any residuals of to control the switched on plate, cleaning agents should be wiped off with a switch off the main switch or screw damp cloth before heating the plate for the...
EMERGENCY PROCEDURES Every time when emergency situation occurs you should: • switch off the working assemblies of the plate • disconnect power supply • call in the service • as some minor faults can be removed by the user in accordance with the below specified instructions, before calling the Customer Service please go through the Table checking every point.
TEChNICAL DATA Rated voltage: 230V 1N~50 Hz Rated power: KK 3400-10 - hotplate: 1 x Ø 145 mm 1,2 kWh - hotplate: 1 x Ø 180 mm 1,8 kWh Dimensions: 520 x 300 x 48 Weight: ca.5 kg...
Page 20
Gram Norge A/S Gram Sverige AB Gram Finland OY Vestvollveien 8 Box 9101 PL 4640 NO-2019 Skedsmokorset SE-200 39 Malmö FI-00002 Helsinki www.gram.no www.gram.se www.gram.fi Gram A/S Aage Grams Vej 1 DK-6500 Vojens www.gram.dk IOAA-551 (04.2010/1)