TP-Link TL-WN951N Quick Installation Manual

Quick Installation Guide
300Mbps Wireless N PCI Adapter
TL-WN951N
MODEL NO.
2
Software Installation
Insert the TP-LINK Resource CD into the CD-ROM
1
drive.
Find the appropriate model and choose
2
Install Driver&Utility.
7106504347 REV1.1.0
Package Contents
TL-WN951N
Resource CD
System Requirement
· Windows 8 Windows7 · Windows Vista
(The installation procedures in Windows 8/ 7/ Vista/ XP are similar. Here takes the procedures in Windows 7 for example.)
The InstallShield Wizard window will appear.
3
Click Next to continue.
Select Install TP-LINK Wireless Con guration
4
Utility and Driver and then click Next .
1
Hardware Connection
300Mbps Wireless Lite N PCI Adapter
MODEL NO. TL-WN951N
QIG
Steps:
1. Turn o your computer and unplug the power cord from the computer.
2. Open the case. Locate an available PCI slot and remove its slot cover.
Keep the screw.
3. Insert the adapter into the PCI slot as shown above.
4. Secure the adapter with the screw removed in Step 2.
5. Close the case and insert the power cord back into the computer.
· Windows XP
6. Turn on your computer.
Click Change to specify the destination location
5
or you can leave it default. Click Next to continue.
Click Install to install the driver and utility for your
6
adapter.
You may see the Found New Hardware Wizard after the
adapter has been inserted. Please click 'Cancel'.
For Windows XP
For Windows Vista
The installation of the driver and utility may take
7
1~2 minutes.
The following screen will then appear.
8
Click Finish to complete the setup.