Table of Contents
Advertisement
To store the new setting in memory press STO.
The messages generated by specific accessories will
be found in the respective user guides supplied with
them.
Clear Last Call (Menu 10)
This function allows you to set the phone to clear, or
retain, (automatically) the last numbers dialed when the
phone is switched off. The phone automatically stores
the last five numbers dialed; refer to 'Last Number
Redial', page 17, for further details.
To clear or retain the last numbers dialed:
Press MENU 1 0.
Press
the numbers) or CLEAR LAST OFF (to retain the
numbers).
Press STO to confirm the setting.
Change Lock Code (Menu 11)
This function allows you to change the lock code of
your phone. (You will need to enter your security code
in order to change the lock code.)
To change the lock code:
Press MENU 1 1. The message SECURITY?
prompts you to enter your security code.
Enter the five-digit security code (default 12345),
and press STO. If you entered an incorrect code,
the message CODE ERROR will appear. When
you have entered the correct security code, the
message NEW CODE? prompts you to enter your
new lock code.
Enter the new four-digit lock code and press STO.
The code may contain numeric digits only; other
characters (e.g. #,
sage STORED confirms that the new lock code
has been set.
to select CLEAR LAST ON (to clear
or
*
) are not allowed. The mes-
39
Advertisement
Chapters
Table of Contents
