Preparation Of Chassis - LG LW5013 Owner's Manual

Preparation of Chassis

1. Insert the guide panels (Type G) into the
guides of the air conditioner (Type H).
Fasten the curtains to the unit with
screws (Type A).
2. Cut the adhesive-backed seal strip
(Type E) to the window width.
Remove the backing from the seal strip
and attach the seal strip to the underside
of the bottom window.
3. Locating unit in window Open the
window and mark center lineon the
center of the inner sill.
4. Attach L bracket
4-1. Install the L brackets behind the inner
window sill, with short side ofbracket as
shown.Use the 2 screws(Type A)
provided.
4-2. The bracket helps to hold unit securely
in place. Be sure to place bracket edge
flush against back of inner sill.
Type A
Type A
Seal Strip
(Type E)
Inner Sill
Inner Sill
Type A
Outer Sill
Center Line
191mm
191mm
Outside
L Bracket
Owner's Manual 13
Installation
Type A
Inside