Samsung GT-i9100 Service Manual page 25

7-2. Assembly
1
Insert the VGA Ass'y in the Front.
Put the chassis on the sensor.
Be careful not to damage the camera FPCB.
3
Put the Receiver Ass'y on the Front.
Furl the Receiver and put it on the Front.
Be careful to damage the FPCB.
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
2
Attach the FPCB on the Front.
Insert the sub PBA in the hook.
Attach the FPCB on the Front.
Screw 2 points.(Size: M1.4*L2)
(Torque: 1.1±0.1 kgf.cm)
4
Connect the cable on the sub PBA.
Organize the cable on the Front
7-3
7. Level 2 Repair