2.3
SETT ING UP WITH A D MX512
CONT ROLLER
2.3-1 DMX512 ADDRESSING WITHOUT ID ADDR ESSING
(Std.2
Conne ct the DMX512 controller to the units i n series .
●
Each u nit has 6 DMX channels so the DMX Addresses should inc rease by increments of
●
6 ( e.g. 1,7,13,19...)
T he ID addr es s has no t been set so th er efore when u sing the contro ller Ch6 must
●
be inactiv e ( CH6=0 ) .
It is als o possi ble to deactivate ID address selecting
●
on the fixture
Each D MX Address may be used as many times as r equired.
●
Any DMX address in t he range fr om 001 to 512 may be used.
●
Exampl e :
2.3-2 DMX512 ADDRESSING WITH ID ADDRESS
Connect the DMX5 12 controller to the units i n se ries
●
Eac h unit has 11 D MX channels so the DMX Addr esses should increase by incre ments of
●
6 ( e.g. 1,7,13,19...)
Eac h DMX Addres s may be used a s many times a s required.
●
Any DMX address in the range fr om 001 to 512 may be used.
●
Eac h DMX addr ess may carry up to 66 separate ID addresses.
●
【
】
ID
should be s et in the menu on each unit in a scending value s
●
(i .e . 1,2,3...)
【
】
ID On
●
ID a ddresses ar e a ccessible fr om CH6 on the DM X512 controller.
●
Example:
ADD : 19 Lacist St. Wesbrark, Maine, U.S.A. (04092)
MODE)
DM X Add r.1
DM X 512
CON TRO LLE R
【
should b e set in the
Se tting s
DMX Add r.1
DM X A ddr.1
ID A dd r.1
ID Add r.2
D MX5 12
C ON T ROL L ER
Phonel : (1) 207-712-3004
【
ID OFF
DMX Add r.7
DM X Add r.1 3
The figur e above shows a simple DMX512
layout w ith the s tarting address of the first
uni t set at 1, with the se cond set at 7 and
so on... ( Note that whe n used in this w ay,
the CH6 ID function mu st be inactiv e ( CH6=0))
】
menu on eac h unit.
DM X Ad d r.1
DM X Add r.7
DM X Ad d r.7
ID Addr.3
ID Add r.1
ID Add r.2
The figur e abov e shows a simp le DMX layout
which has used three units at each DMX addre ss.
The three units have different ID addresses w hic h
allows the user to collectively c ontrol the whol e
group of units a t that DMX addr ess by setting
CH6 to 0, or to c ontr ol eac h uni t independently by
first selecting th e DMX address and then by us ing
CH6 to locate th e target ID addr ess .
5
TE-3X48WW PARLED AQUA
】
【
】
fr om the
Settings
menu.
. . . . . . . . . . . .
(Std.2
MODE )
D MX A dd r. 7
ID Add r.3
. . . . . . . . . . . .
sales@te-lighting.com
http://www.te-lighting.com