Summary of Contents for terrapin Safety Turtle SB102
Page 1
Receiver and Horn on Plexi glass stand Receiver and Horn wall mountable Photo 1a Photo 1b T able of Contents The Integrator Base Station Operation of the Wireless Secondary Alarm Test Procedure Terrapin Communications Inc. 4017 Carling Ave, Suite 301 Ottawa, ON K2K 2A3 1-800-368-8121 www.safetyturtle.com...
Page 2
The Integrator Base Station In order to use Safety Turtle with a home alarm system or with a Secondary Alarm supplied by Terrapin, an Integrator Base Station is required. The Integrator Base Station looks like a regular Base Station (see Safety Turtle®...
Page 3
2 seconds, then stops. Resets as for latching output, or on power interruption. Unless otherwise requested, all channels are factory preset latching. On request, Terrapin will factory configure a channel momentary. The customer can also field switch a channel from latching to momentary, and conversely. Instructions available on request.
Page 4
LOW BATTERY light is on. (A pair of CR2032 3 volt batteries are required. Call Terrapin at 1-800-368-8121 for instructions on how to replace.) ALARM light on the Receiver is flashing and the Horn is sounding, but the Integrator Base is not alarming: Check that the Transmitter is properly inserted into the Integrator Base Station.
Page 5
plug [or cover the jack with aluminum foil to short the leads] when the Transmitter has been removed from the Integrator Base Station. 10. If you find it more convenient to mount the Receiver and Horn on your wall, a wall-mounted unit can be ordered at 1-800-368-8121.
Need help?
Do you have a question about the Safety Turtle SB102 and is the answer not in the manual?
Questions and answers