Operation Instructions; Install Batteries; Getting Started And Setting The Time - Now & Zen Zen Timepiece Manual

Introduction
sounds the sweetest. However, it can be set to strike quite
loudly if volume is required.
Your Zen Timepiece is the result of ten years of product
evolution at Now & Zen, and we trust that you will find it a
delight and a pleasure. Thank you for bringing this unique
creation into your life.
8
II. OPERATION INSTRUCTIONS

Install Batteries

Using a small Phillips head screwdriver, remove the battery
door on the bottom of the wood platform and install two new
"C" size alkaline batteries. Be sure to install the batteries as
shown on the inside of the battery case and make sure both
ends of the batteries are making contact with the terminals.
Battery life is typically one year with normal use, but battery
life will vary depending on individual use preferences. The
clock includes a "low battery" indicator (see "Power" on page
17 for details). Replace the battery door using the screws.

Getting Started and Setting the Time

When the batteries are installed the clock "powers up"
displaying the time at 12:00:00 PM. First, set the clock to the
correct time by pressing the "SET CLOCK/TIMER" button
once, which causes the programmable hour and minute
numbers to begin flashing so they can be set to the correct
time using the corresponding "HOUR" and "MINUTE"
9