Atlas Copco LS 14 Safety & Operating Instructions Manual
Atlas copco hydraullc cut-off saw safety & operating instructions
Hide thumbs
Also See for LS 14:
- Overhauling manual (12 pages) ,
- Safety and operating instructions manual (24 pages) ,
- Safety and operating instructions manual (252 pages)
Subscribe to Our Youtube Channel
Related Manuals for Atlas Copco LS 14
Summary of Contents for Atlas Copco LS 14
- Page 1 LS 14/LS 16 ©Copyright 2005 ATLAS COPCO CONSTRUCTION TOOLS AB 2005-06 NACKA • SWEDEN No 3392 5042 01 www.atlascopco.com...
- Page 2 General safety rules... 3 Protective equipment... 3 MARKINGS ... 4 Identification ... 4 CE ... 4 Safety signs on the Cut-off Saw ... 4 GENERAL INFORMATION... 4 OPERATING INSTRUCTIONS ... 5 Starting the Cut-off Saw ... 5 Stopping the Cut-off Saw ... 5 Service schedules...
-
Page 3: Safety Instructions
Signs and decals that are important for your safety and the care of the Cut-off Saw are included with each Cut-off Saw. Make sure that they are legible. New decals can be ordered using the spare parts list. - Page 4 • Use your common sense • Do not use the Cut-off Saw when you are tired or under influence of drugs, alcohol or anything else that may influence your vision, reaction or judgement • Never leave the Cut-off Saw connected with the power source turned on •...
- Page 5 An aspirator can be con- nected to the flange socket of the guard. The Atlas Copco LS 14 Cut-off Saw and the LS 16 Cut-off Saw are delivered with 2 m 3/8” tail-hoses with ½” Flat-Face quick-release couplings.
- Page 6 5 English For precise and clean cutting jobs on roads, sidewalks and floors, the Atlas Copco LSC Cart for the Cut-off Saw is recommended. The use of the Cart gives a better working posture, and the cutting depth can be adjusted by means of an arm at the front of the Cart. The Cart is equipped with water kit.
- Page 7 A poorly maintained Cut-off Saw is a haz- ard. Doing regular maintenance and lubri- cation jobs as listed in these schedules will help keep the Cut-off Saw in a safe work- ing condition. Apart from the daily jobs, the schedules are based on the operation hours of the Cut-off Saw.
- Page 8 7 English WARNING Maintenance must be done only by suitably qualified and competent persons. Problem Cut-off Saw turns too fast or develops too much torque Cut-off Saw will not turn at all or turns too slowly Cut-off Saw does not...
- Page 9 Required cooling capacity Vibration level (ISO 8662-4) Note: Atlas Copco hydraulic Cut-off Saws are clearly marked with E.H.T.M.A. categories. It is important that any power source is of a compatible category. If any doubt, con- sult your Atlas Copco dealer.
- Page 10 Sound power level (ISO 15744) L IMPORTANT We, Atlas Copco Construction Tools AB, cannot be held liable for the conse- quences of using the declared values, instead of values reflecting the actual expo- sure, in an individual risk assessment in a work place situation, over which we have no control.
Need help?
Do you have a question about the LS 14 and is the answer not in the manual?
Questions and answers