Connecting The 3D Woofer (Kv-Hw212M83 Only); Connecting Optional Components - Sony KV-HW212 Operating Instructions Manual

x Connecting the 3D WOOFER
B
KV-HW212M83 only
You can enjoy high quality sound by connecting the 3D WOOFER as follows:
Step 1
Notes
• Connect only the supplied 3D WOOFER; otherwise your TV may malfunction.
• Unplug your TV from the wall outlet when connecting the 3D WOOFER.
• To prevent a malfunction caused by a short circuit of the terminals, make sure that none of the 3D
WOOFER wire strands stick out, making contact with the neighbouring 3D WOOFER terminal.
x Connecting optional components
Connecting to the video input terminal ( t )
TV front panel
TV rear panel
1
(MONO) L
R
Note
• If you connect a VCR to 8 (antenna input), preset the signal output from the VCR to the
program number 0 on the TV (see page 22).
3D WOOFER
2
L
(MONO) R
Y
C
B
L (MONO)
C
R
R
Step 2
Black
wire
Audio/Video cable
(not supplied)
Audio cable
(not supplied)
Antenna cable
(not supplied)
Audio/Video cable
(not supplied)
Additional Information
Red wire
Camcorder
Walkman
VCR
25