Philips HC7460 User Manual page 10

ENGLISH
10
2
1
2 Switch on the appliance.
The lock symbol starts to flash. You cannot change the length
,
setting anymore.
Note: If you want to select a different length setting, switch off the appliance.
Press the up button or down button to select the desired length setting and
switch on the appliance again.
Cleaning
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as alcohol, petrol or acetone to clean the appliance.
Never immerse the appliance in water or rinse it under the tap.
1 Make sure the appliance is switched off and disconnected from
the mains.
2 Wipe the housing of the appliance with a dry cloth.
3 Remove the comb and clean it with the brush.
4 Press the release button (1). The cutting unit comes off the
appliance (2).
5 Clean the cutting unit with the brush.
6 Clean the inside of the appliance with the cleaning brush.
Never immerse the appliance in water or rinse it under the tap.