Using The Water Dispenser - Samsung RF261B Series User Manual

USING THE COLD WATER
DISPENSER

Using the Water dispenser

(RF261B)
Place a glass underneath the
water outlet and push gently
against the water dispenser
lever with your glass. Make
sure the glass is in line with
the dispenser to prevent the
water from splashing out.
If you have just installed the
refrigerator or installed a new
water fi lter, Flush 3 gallons through fi lter before
use (fl ush approximately 6 minutes). Make sure
water fl ows cleanly before drinking.
If you have a long vacation or business trip,
close the water valve and shut o the water
CAUTION
supply to the Refrigerator. This will help
prevent accidental leakages.
Water clouding phenomenon
All water provided to refrigerators fl ows
through the core fi lter which is an alkaline
water fi lter. In this process, the pressure in
the water that has fl owed out of the fi lter
gets increased, and oxygen and nitrogen
become saturated. When this water fl ows
out in the air, the pressure plummets and
the oxygen and nitrogen get supersaturated
so that they turn into gas bubbles. The
water could look misty due to these oxygen
bubbles.The water may look temporarily
cloudy due to these oxygen bubbles. After
a few seconds, the water will look clear.
The water tank' s capacity is approximately
one third (1/3) of a gallon.
Please wait 1 second before removing the
cup after dispensing water to prevent spills.
16_
operating
PUSH
2012.5.16 3:2:5 PM