Summary of Contents for Accutire MS-4034
- Page 2 White Flash Light Buttons Emergency Flash Lights LCD Display Belt Cutter Tire Gauge nozzle Hammer Stand Legs...
- Page 4 3. Press repeatedly to scroll through units. 4. Gauge is ready for operation. 5. Gauge will automatically shut off in 10 seconds. psi on display.
- Page 5 2.9V and new batteries. 153psi / 10.60bar / 1060kPa / 10.60kg/cm² Emergency /Flare tool stand 1. Unfold 3 legs, pull the stand away from the gauge (picture 1-1, 1-2, 1-3) 2. Turn the stand upside down (picture2-1) and push the stand back to the gauge (picture2-2), (Note: the slot in stand indicate the right direction matching with gauge).
-
Page 7: Install Batteries
Note: To ensure the emergency light works well, you need to stand the tripod tool when you use the flash light in emergency. Install Batteries: 1. Remove the battery door by pressing and sliding (Picture 1). 2. Install 3x AA batteries proper orientation and correct +/-polarity (Picture 2&3). - Page 8 FCC Information...
- Page 9 U. S. Patent NO. D724458; D724,458S Tel : 757-706-3839...
Need help?
Do you have a question about the MS-4034 and is the answer not in the manual?
Questions and answers