Before Using For The First Time; How To Use - Montgomery Ward EPC-668 Instruction Manual

Before Using for the First Time

1. Remove packaging materials such as cardboard, plastics or styrofoam and
discard appropriately.
2. Clean all of the parts by wiping with a soft, damp cloth or sponge and dry BEFORE FIRST USE BEFORE FIRST USE
thoroughly.
LID ASSEMBLY:
1. BEFORE FIRST USE
ove packaging materials such as cardboard, plastics or styrofoam and discard appropriately. Remove packaging materials such as cardboard, plastics or styrofoam and discard appropriately.
2.
Clean all the parts by wiping with a soft damp cloth or sponge and dry thoroughly.
all the parts by wiping with a soft damp cloth or sponge and dry thoroughly.
1. Open the lid: grasp the handle firmly and then turn the lid clockwise until it
EMBLY LID ASSEMBLY BEFORE FIRST USE
loosens. (See Figures 1 & 2)
Remove packaging materials such as cardboard, plastics or styrofoam and discard appropriately.
Open the lid: grasp the handle firmly and then turn the lid clockwise until it loosens. (See Figure 1-2)
d: grasp the handle firmly and then turn the lid clockwise until it loosens. (See Figure 1-2)
BEFORE FIRST USE
Clean all the parts by wiping with a soft damp cloth or sponge and dry thoroughly.
1.
D ASSEMBLY Remove packaging materials such as cardboard, plastics or styrofoam and discard appropriately.
2.
en the lid: grasp the handle firmly and then turn the lid clockwise until it loosens. (See Figure 1-2) Clean all the parts by wiping with a soft damp cloth or sponge and dry thoroughly.
1.
Remove packaging materials such as cardboard, plastics or styrofoam and discard appropriately.
LID ASSEMBLY
2.
Clean all the parts by wiping with a soft damp cloth or sponge and dry thoroughly.
Open the lid: grasp the handle firmly and then turn the lid clockwise until it loosens. (See Figure 1-2)
LID ASSEMBLY
Open the lid: grasp the handle firmly and then turn the lid clockwise until it loosens. (See Figure 1-2)
1
t the inner tank and add desired ingredients. Food and water should be no higher than 4/5 1. Take out the inner tank and add desired ingredients. Food and water should be no higher than 4/5
2. Clean the Inner Pot and Heating Plate before placing the Inner Pot inside the
er than 1/5 of the height of inner tank, and for expandable food, no higher than 3/5. (See and no lower than 1/5 of the height of inner tank, and for expandable food, no higher than 3/5. (See
Pressure Cooker (see Figure 3).
) Figure 3-5)
ake out the inner tank and add desired ingredients. Food and water should be no higher than 4/5
3. Take out the Inner Pot and add desired ingredients. Food and water should be
no lower than 1/5 of the height of inner tank, and for expandable food, no higher than 3/5. (See
no higher than 4/5 and no lower than 1/5 of the height of the Inner Pot, and for
ure 3-5)
1. Take out the inner tank and add desired ingredients. Food and water should be no higher than 4/5
and no lower than 1/5 of the height of inner tank, and for expandable food, no higher than 3/5. (See
expandable food, no higher than 3/5 (see Figures 4–6).
1. Take out the inner tank and add desired ingredients. Food and water should be no higher than 4/5
Figure 3-5)
and no lower than 1/5 of the height of inner tank, and for expandable food, no higher than 3/5. (See
Figure 3-5)
e inner pot and heating plate before putting in the inner tank. After that, turn the inner pot to 2. Clean the inner pot and heating plate before putting in the inner tank. After that, turn the inner pot to
make it fit to the heating plate. (See Figure 6)
o the heating plate. (See Figure 6)
Clean the inner pot and heating plate before putting in the inner tank. After that, turn the inner pot to
ke it fit to the heating plate. (See Figure 6)
2. Clean the inner pot and heating plate before putting in the inner tank. After that, turn the inner pot to
make it fit to the heating plate. (See Figure 6)
2. Clean the inner pot and heating plate before putting in the inner tank. After that, turn the inner pot to
make it fit to the heating plate. (See Figure 6)
3. Install the lid and turn it counter-clockwise until it locks with a clamping sound. (See Figure 7.8)
he lid and turn it counter-clockwise until it locks with a clamping sound. (See Figure 7.8)
Installed within the lid is a sealing gasket. The purpose of this gasket is for sealing pressure within the
ithin the lid is a sealing gasket. The purpose of this gasket is for sealing pressure within the
ooker and should be periodically inspected for damage after use. pressure cooker and should be periodically inspected for damage after use.
nstall the lid and turn it counter-clockwise until it locks with a clamping sound. (See Figure 7.8)
4. Install the lid and turn it counter-clockwise until it locks with a clamping sound
pressure discharge valve in its position, then set to "Seal," and be sure that the Floating valve 4. Put the pressure discharge valve in its position, then set to "Seal," and be sure that the Floating valve
alled within the lid is a sealing gasket. The purpose of this gasket is for sealing pressure within the
position. (see Figure 9-a,9-b) is in down position. (see Figure 9-a,9-b) (see Figures 7–8). Installed within the lid is a sealing gasket. The purpose of
ssure cooker and should be periodically inspected for damage after use.
3. Install the lid and turn it counter-clockwise until it locks with a clamping sound. (See Figure 7.8)
Installed within the lid is a sealing gasket. The purpose of this gasket is for sealing pressure within the
this gasket is for sealing pressure within the pressure cooker and it should be
3. Install the lid and turn it counter-clockwise until it locks with a clamping sound. (See Figure 7.8)
ut the pressure discharge valve in its position, then set to "Seal," and be sure that the Floating valve pressure cooker and should be periodically inspected for damage after use.
Installed within the lid is a sealing gasket. The purpose of this gasket is for sealing pressure within the
periodically inspected for damage after use.
down position. (see Figure 9-a,9-b)
pressure cooker and should be periodically inspected for damage after use.
4. Put the pressure discharge valve in its position, then set to "Seal," and be sure that the Floating valve
5. Put the Pressure Discharge Valve in its position, then set to "Seal," and be sure
is in down position. (see Figure 9-a,9-b)
4. Put the pressure discharge valve in its position, then set to "Seal," and be sure that the Floating valve
that the Floating Valve is in the downward position. (See Figure 9 & 10)
is in down position. (see Figure 9-a,9-b)
HOW TO USE YOUR PRESSURE COOKER
OW TO USE YOUR PRESSURE COOKER
www.wards.com www.wards.com
HOW TO USE YOUR PRESSURE COOKER
HOW TO USE YOUR PRESSURE COOKER 5
www.wards.com
6
HOW TO USE YOUR PRESSURE COOKER
2
4 5
7
8
10
9
5
Wards.com
www.wards.com
PRESET MENU BUTTONS:
This pressure cooker has 7 food specific preset menu buttons. Each preset has a
default start time with minimum and maximum cooking times allowed for each
setting. Please see the chart below for reference:
Menu Presets
Rice/Grains
Meat/Poultry
Vegetables/Fish 5
Soup/Stew
3
Pork/Ribs
Desserts
Beans/Potatoes 35
Pressing a preset menu button once will automatically program the default cooking
time. Each additional push of the selected preset button will increase the cook-
ing time by 1-minute increments until the maximum allotted time for the preset is
reached. Once the maximum cooking time is reached, pushing the preset menu
button again will reset the cooking time to the minimum setting.
1. Secure the lid onto the unit, turn it counter-clockwise to lock into place.
6
2. Make sure the Pressure Discharge Valve is set to the "Seal" position.
3. Plug in the power cord.
4. The LED screen will display: 0.0 00.
5. Select your desired preset. The cooking time will display for each selection. The
pressure cooker will automatically start once you have selected the desired
preset menu function.
6. When proper pressure is achieved, the LED screen will display P0 05 (for cook-
ing RICE as an example) and the pressure cook-time will begin to count down.
7. When the unit has pressurized, it will begin to pressure-cook the food. You may
hear quiet hissing or sizzling sounds coming from inside of the unit during this
time.
8. When cooking has completed, the pressure cooker will beep 3 times and auto-
matically go to "Keep Warm" mode. The display will read b00.
9. The "Keep Warm" indicator light will begin to flash/flicker. This means the pres-
sure cooker is naturally releasing the pressure. This will take approx. 10-15 min.
10. If you wish to "Quick Release" the pressure, rotate the Pressure Discharge
Valve to the "Vent" position to release pressure until the Float Valve sinks.
CAUTION: Keep hands and face away from the Pressure Discharge Valve
while in the "Vent" position. Failure to comply may result in serious injury.

How to Use

Default Start Minimum Time
Time (Minutes) (Minutes)
10 10
20 20
5
30 1
35 1
1 1
1
1 888 557 3848
• • •
Maximum Time
(Minutes)
15
60
15
99
50
15
90
7