Hotpoint TM VPL JW0 Operating Instrucctions

After boiling a certain amount of water the switch lowed to get lime dissolved and then the boiler is
is turned off, commercially decalcifies or some emptied. Please remember to rinse the unit fresh
vinegar are added to water and some time is al- water.
TROUBLESHOOTİNG
Problems Possible Causes Solutions
It does not
• Boiler, boiling switch, • Contact technical service.
boil water.
on-off switch or
energy transmitting
contacts may have
failed.
• Boiling switch and • Take the boiling switch and on-off switch to
on-off switch are not "on" position.
in "on" position.
• Because of little • Wait until the unit to cool down or add cold
water, safety water.
thermostat has
operated to prevent
the unit from starting.
It boils
• Lid or teapot is not • Close the lid of boiler or place the teapot on
on the kettle the kettle.
• Boiling switch has • Contact technical service.
failed.
It delays
• Excess lime on the • Clean the lime in the equipment as described
heating
kettle base in the user's manual.
water.
• Boiling switch is not • When on-off switch is in "on" position, take
in boiling position the boiling switch to boiling position.
On-off
• Excess lime on the • Clean the lime in the equipment as described
switch does
kettle base in the user's manual.
not work.
hotpoint. eu
en
Indesit Company SpA
Viale Aristide Merloni, 47
60044 Fabriano (AN), Italy
www.indesitcompany.com
13
TR Kullanma talimatları 5 EN Operating instructions
X
2
1
4
6
TM VPL JW0
10 TM VMT JX0
TM VPL JR0
9
7
8
2
3
10
5