Wearing Your Headset - Anycom MILOS-9 User Manual

Please note:
•
If the headset is powered down, turning on the headset will auto reconnect the last used device.
•
If the headset is disconnected but powered on, press MFB shortly to connect the link again.
•
If there is abnormal loss of link happened (e.g. out of range), the headset will automatically try to reconnect the mobile phone several times.
•
If the mobile phone cannot locate the network signal (e.g. out of reach), alert tone will be heard every 5 seconds in the headset.
(Not every mobile phone supports no network signal alert feature!)
•
If there is no Bluetooth connection for more than 1 hour, the headset will switch off automatically.

5. Wearing your headset:

Page 5
MILOS-9 - English