Connecting The Gigaset Se361 Wlan - Siemens gigaset se361 wlan Instruction Manual

Quick Start Guide

Connecting the Gigaset SE361 WLAN

To the DSL or cable modem
ì
Connect the socket on the back of the router marked WAN to your DSL or cable
modem with an Ethernet cable.
Note:
Use a category 5 Ethernet cable with RJ-45 jacks on both ends for all connections.
The cable will normally be included with your modem. However, you can also also
use the yellow Ethernet cable, which comes with the Gigaset SE361 WLAN.
To the PC
You can connect PCs to your Gigaset SE361 WLAN with or without wires.
Wireless
A wireless connection is made using a wireless network adapter, which must be
installed in your PC. This can be, for example, a Gigaset USB Stick 54 or another
802.11g or 802.11b-compatible wireless network adapter.
A wireless network is defined by assigning an identical SSID to all the devices. You
must therefore enter the SSID for the Gigaset SE361 WLAN in your network adapter
configuration. The default setting of the SSID is ConnectionPoint.
20
DSL or cable modem