Using Your Common Interface Slot; Common Interface - Technika 15.4-310 User Manual

USING YOUR COMMON INTERFACE SLOT

Common Interface

The Common Interface (CI) slot is designed to accept the Conditional Access Module (CAM) and
Smart Card in order to view the pay TV programmes and additional services. Contact your Pay Per
View TV service provider to get more information about the modules and subscription.
Note: Conditional Access Modules and Smart Cards are sold separately.
WARNING! SWITCH OFF YOUR TV BEFORE ANY MODULE IS INSERTED IN THE
COMMON INTERFACE SLOT.
The CI slot is located on the side of your TV. Insert the CAM correctly into the CI slot, then add the
Smart Card to the CAM.
1. Turn on the TV and ensure 'Freeview' is selected as the source.
2. If the CAM is detected the TV will display the following
message on the screen:
Common interface Module inserted.
Wait for a few moments until the card is activated.
3. Select the relevant digital channel (e.g. channel 34 for
Setanta broadcast).
4. Detailed information on the Smart Card in use is displayed.
5. Press the OK button to access the card menu. Refer to the module Instruction manual for setting
details.
6. When the module is removed, the following message will appear on the screen:
Common interface module removed.
Tesco-Tecknika IDTV .indd Sec1:25 Tesco-Tecknika IDTV .indd Sec1:25
User Guide
25
07/07/2009 16:52:04 07/07/2009 16:52:04