②. Press this button to monitor Door2 camera without a call. 3. Press SwitchCall ③ to transfer a talk to the other Magic Touch during a talk. 4. To select Video source, Press Video Select ④ Button. Video source will be displayed as below Door1 or Door2 -->...
1. Other connected Magic Touch IDs are displayed on the screen. 4. Press Volume Button⑨ to adjust the volume. 2. Select one of 4 IDs ① and Press Call/End Call ② Button to call the selected Magic Touch Unit. To cancel the call, press Call/End Call ② again.
Photo view - Large view Photo view – Small view How to see the captured photos in large viewing size. 1. Press a button of Door1① ~ CCTV4 ⑥ to see captured photo. How to see the captured 4 photos in small viewing size. 2.
Setup Date/Time How to select and set the sub-functions on the unit Date/Time Audio How to set Date and Time. Video 1. Press Date Button ① to set Date then Press OK Button ③. Date Input Format is DD / MM / YYYY. Sound update 2.
Audio Video How to set the volume of Bell sound, Talk volume with Door camera and the other Magic Touch (subphone) and audio from CCTV camera. 1. Press one of Door1 ① ~ CCTV4 ⑦ button to check the saved Bell music and volume level of How to set the level of Brightness, Contrast, and Saturation of video from Door camera and each equipment.
2. Enter Sound Update menu and then enter password. Default password: 1234 2. Press Delete Button ① or Add Button ② to delete or add melody les into Magic Touch. 3. Magic Touch can store maximum 20 melodies and Free ③ indicates available space to add new melodies.
Clean Screen Password How to clean Touch screen. 1. Press Start Button ① then touch function will be suspended for 15 seconds for cleaning. How to set the password. 2. ② shows the remaining time. Put password in order ① --> ② --> ③ 3.
2. Select and Press one of desired name on the blue bar. 3. Press OK Button ⑤ to save change. How to select the language of Magic Touch. The same ID name cannot be duplicated in other unit. 1. Press ENGLISH Button ① or RUSSIAN Button ②.
Touch Calibration Initialization How to calibrate the Touch coordinates. How to initialize all the setting of Magic Touch Choose this function and enter the password, then con rm initialization. Use this function only when Touch coordinates does not t. After initialization all settings will be reseted. Default password: 1234 Software Update 1.
System Info Safety Instructions 1. Do not install near other electronic equipment such as computers, TV, video recorder as this may cause radiated interference to the unit. 2. Do not disassemble the unit. 3. Do not spray water on the indoor unit. Do not keep the outdoor unit where it will be exposed to extreme moisture.
Need help?
Do you have a question about the Magic Touch and is the answer not in the manual?
Questions and answers