Luxibel LX496 User Manual

2-layer switcher and scaler

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

LX496

2-LAYER SWITCHER AND SCALER

USER MANUAL

Table of Contents

Summary of Contents for Luxibel LX496

Page 1 LX496 2-LAYER SWITCHER AND SCALER USER MANUAL...
Page 3: Safety Instructions
This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules. If in doubt, contact your local waste disposal authorities. Thank you for choosing Luxibel ® ! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, do not install or use it and contact your dealer.
Page 4: Application Scheme
SDI (SD/HD/3G compatible) into a user- selectable video format. The LX496 works as a real seamless, 2-layer switcher with a loop out for each input. All inputs support loop trough output. It combines truly seamless, glitch-free switching with advanced scaling technology to meet the requirements of high-quality, high-resolution video presentation.
Page 5: Hardware Installation
Installation The LX496 video scan convertor and scaler is designed to be rack-mounted. Before mounting this device, make sure to read chapters 2. Safety Instructions and 3. General Guidelines first. To install the device: 1.
Page 6: Hardware Overview
S-Video output port. Supports PAL, NTSC, and SECAM. 15-pin D-sub VGA connector for VGA output signals. Compatible with component YPbPr signals. Connection to another LX496 or any device with DVI input. DVI (DVI-I) output to a monitor or LED screen that supports DVI. This connector DVI1 does not support hot plugging.
Page 7: Front Panel
LX496 Front Panel Also, refer to the image on page 6. Plug in the power cord [13] and switch on the device using the on/off switch [12]. The display [23] shows the name of the device. The device performs a self-test, and then loads the last used settings and sends the image to the target output.
Page 8: Saving Parameters
Note: The switching speed can be adjusted through the DIMMER button on the front panel. Scale and Position Setting Different channels may have different picture size and position. The LX496 allows you to set size and position for each channel.
Page 9: Setting The Output Resolution
Setting the Output Resolution 1. Select the OUTPUT icon in the taskbar. 2. The LX496 offers up to 15 different output resolutions to choose from. 3. Select the desired output resolution and the resolution will be updated automatically. Switching the Input Signal 1.
Page 10 LX496 Setting Picture-In-Picture (PIP) Images 1. Select the PIP icon in the taskbar. 2. Click and hold the slider with the left mouse button, and slide to the right to activate the PIP function. 3. Next, choose the position of your secondary image. Click the MODE tab.
Page 11: Other Settings
LX496 5. Finally, select the video source, i.e. IMAGE1 or IMAGE2. 6. You can now modify the parameters for the selected image by clicking the corresponding tab in the taskbar. Note: The PIP function will display the same image if Image1 and Image2 have the same video input source.
Page 12: Troubleshooting
LX496 2. Choose the desired language (English or Chinese) under the LANGUAGE tab. 3. Confirm by clicking SET. 4. The selection will be effective after rebooting. To do so, click the REB… button. 5. Proceed in the same way to modify the IP address (IP).
Page 13: Technical Specifications
(incorrect) use of this device. For more info concerning this product and the latest version of this manual, please visit our website www.luxibel.com. The information in this manual is subject to change without prior notice.
Page 14 Velleman® Service and Quality Warranty Since its foundation in 1972, Velleman® acquired extensive experience in the electronics world and currently distributes its products in over 85 countries. All our products fulfil strict quality requirements and legal stipulations in the EU. In order to ensure the quality, our products regularly go through an extra quality check, both by an internal quality department and by specialized external organisations.